Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Important Safeguards and Precautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO
THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANUAL AND ON THE PRODUCT.
INSTALLATION
OUTDOOR ANTENNA INSTALLATION
1
POWER SOURCE CAUTION
1 SAFE ANTENNA AND CABLE CONNECTION
Operate only from a power source indicated on the unit or in this
If an outside antenna or cable system is connected to the equipment, be sure the
manual. If necessary, have your Electric Utility Service
antenna or cable system is grounded so as to provide some protection against
Company or Video Products Dealer verify the power source in
built up static charges and voltage surges.
your home.
NEC - NATIONAL
Section 810 of the National
ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
Electrical Code, ANSI/NFPA 70
2
POLARIZED OR GROUNDING PLUG
GROUND
CLAMP
(in Canada, part 1 of the Canadian Electrical
As a safety feature, this product comes with either a polarized
ANTENNA
DISCHARGE UNIT
Code) provides information with respect to
power cord plug (one blade is wider than the other), or a three-
(NEC SECTION 810-20)
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
proper grounding of the mast and supporting
wire grounding type plug.
EQUIPMENT
(NEC SECTION 810-21)
GROUND CLAMPS
structure, grounding of the lead-in wire to an
POLARIZED PLUG CAUTION:
POWER SERVICE GROUNDING
antenna discharge unit, size of grounding conductors,
ELECTRODE SYSTEM
(NEC ART 250, PART H)
This plug will only fit into an outlet one way. If you cannot fully insert
location of antenna discharge unit, connection to grounding
the plug, try reversing it. If it still will not fit, have an electrician
electrodes and requirements for the grounding electrode.
install the proper wall outlet. Do not defeat the safety feature by
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR
tampering with the plug.
CIRCUITS
GROUNDING PLUG CAUTION:
An outside antenna system should be located well away from power lines,
This plug will only fit into a three-hole grounding outlet. If necessary,
electric light or power circuits and where it will never come into contact with
have an electrician install the proper outlet. Do not defeat the safety
these power sources if it should happen to fall. When installing an outside
feature by tampering with the plug.
antenna, extreme care should be taken to avoid touching power lines, circuits or
other power sources as this could be fatal. Because of the hazards involved,
3
POWER CORD
antenna installation should be left to a professional.
Make sure power cords are routed so that they are not likely to
have anything rest on them, roll over them, or be in the way of
USING THE UNIT
walking traffic. If an extension cord is used, make sure it also
has either a polarized or grounded plug and that the cords can
If the unit has been in storage or moved to a new location, refer first to the
be securely connected. Frayed cords, damaged plugs, and
INSTALLATION section of these safeguards.
damaged or cracked wire insulation are hazardous and should
1 KEEP THE UNIT AWAY FROM WATER OR MOISTURE OF ANY KIND.
be replaced by a qualified service technician.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR STRONG
Overloaded outlets and extension cords are fire hazards and
IMPACT, unplug the unit and have it inspected by a qualified service technician
should be avoided.
before use.
4
DO NOT BLOCK VENTILATION HOLES
3 DURING AN ELECTRICAL STORM
Ventilation openings in the cabinet release heat generated during
During a lightning storm, whether indoors or outdoors, or before leaving the unit
operation. If they are blocked, heat build-up inside the unit can
unused for extended periods of time, disconnect all equipment from the power
cause failures that may result in a fire hazard or heat damage to
source as well as the antenna and cable system.
cassettes or discs.
4 WHEN THE UNIT IS PLUGGED IN
For protection, follow these rules:
• Never expose the unit to rain or water. DO NOT OPERATE if liquid has been
a. Never cover ventilation slots or the unit while in use, or
spilled into the unit. Immediately unplug the unit, and have it inspected by a
operate the unit when placed on a bed, sofa, rug, or other
service technician. Fire and shock hazards can result from electrical shorts
soft surface.
caused by liquid contact inside.
b. Avoid built-in installation, such as a book case or rack,
• Never drop or push any object through openings in the unit. Some internal parts
unless proper ventilation is provided.
carry hazardous voltages and contact can cause electric shock or fire hazard.
5
PLACEMENT: AVOID EXTREMELY HOT LOCATIONS OR
Do not put any foreign object on the disc tray.
SUDDEN TEMPERATURE CHANGES
• Avoid placing the unit directly above or below your TV set as this may cause
electrical interference. Keep all magnets away from electronic equipment.
Do not place the unit over or near heater or radiator, in direct
sunlight, inside closed vehicles, in high temperature [over 104°F
5 USING ACCESSORIES
(40°C)], or in over 75% humidity. If the unit is suddenly moved
Use only accessories recommended by the manufacturer to avoid risk of fire,
from a cold place to a warm one, moisture may condense in the
shock, or other hazards.
unit and on the tape causing damage. Never subject the unit to
6 CLEANING THE UNIT
vibration, impact, or place it so that the surface is tilted as
Unplug the unit. Then, use a clean, dry, chemically untreated cloth to gently
internal parts may be seriously damaged.
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air that
could over-spray, or seep into the unit and cause electrical shock. Any substance
6
TO AVOID PERSONAL INJURY
such as wax, adhesive tape, etc. may mar the cabinet surface. Exposure to
• Do not place unsecured equipment on a
greasy, humid, or dusty areas may adversely affect internal parts.
sloping surface.
• Do not place this unit on any support that
SERVICE
is not firm, level, and adequately strong.
The unit could fall causing serious injury
1
DO NOT SERVICE THIS PRODUCT YOURSELF
to a child or adult and damage to the unit.
If, after carefully following the detailed operating instructions, this product
• An appliance and cart combination should
does not operate properly, do not attempt to open or remove covers, or make
be moved with care. Quick stops, excessive force, and
any adjustments not described in the manual. Unplug the unit and contact a
uneven surfaces may cause the appliance and cart
qualified service technician.
combination to overturn.
2
IF REPLACEMENT PARTS ARE REQUIRED
• Carefully follow all operating instructions and use the
Make sure the service technician uses only parts specified by the
manufacturer's recommended accessories when operating
manufacturer, or those having the same safety characteristics as the original
this unit or connecting it to any other equipment.
parts. The use of unauthorized substitutes may result in fire, electric shock,
or other hazards.
3
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK
After any service or repairs to the unit, request the service technician to
conduct a thorough safety check as described in the manufacturer’s service
literature to ensure that the unit is in safe operating condition.
2
PV-D4735S P1-25 (041224).p65
2
2004/12/24, 13:16
...