Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
HUMAX does not have any responsibility for direct, indirect, accidental, necessary and other corruptions due to your offer or use of the information contained in this manual. Trademarks 'Dolby' and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theatre Systems Inc. Manufactured under license from Dolby Laboratories. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patent and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. US Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and 6,516,132. Thank you for purchasing a HUMAX digital terrestrial receiver. Please read this user manual carefully, to be able to safely install, use and maintain the receiver at maximum performance. Keep this user manual next to your receiver for future reference. GB 1 ** Notice ** ** ** ** ** Notice ** ** ** ** Read this manual carefully and make sure you understand the provided instructions. For your safety, know what the reaction upon each action will be. Warnings, Cautions and Notes Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations. • Warning Indicates a hazardous situation which, if not avoided, could result in (serious) injury. • Caution Indicates a situation which, if not avoided, could damage the equipment or other apparatus. • Note Indicates additional information to the user to make the user aware of possible problems and information of any importance to help the user to understand, to use and to maintain the installation. To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. GB 2 ** ** ** ** ** ** ** ** ** ** ** ** Only for DVD player 1. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The DVD player is classified as a CLASS 1 LASER product.The CLASS 1 LASER PRODUCT label is located on the exterior. 2. Supported disc formats The following discs can be used in your DVD. Note: Supported discs could be different with the following disc. • DVD Video (Digital Versatile Disc) • Super Video CD • Video CD • Super Audio CD (Only plays the CD layer of a hybrid SACD disc) • Audio CD • MP3 GB 3 ** Notice ** ** ** ** ** Notice ** ** ** ** 3. Region code of the DVD player and DVDs Since DVD films are not normally released in all parts of the world at the same time, all DVD players have a specific regional code. Discs can be given an optional regional code. If the regional codes differ between the player and the disc, playback is not possible. DVDs must be marked ALL for all regions or specific number for specific region to work in this machine. If the DVD is marked with a different region, it cannot be played in this DVD player. Some DVD discs may not have a regional code label even though their playback is prohibited by area limits. Region 2 Europe, Japan, Middle East, Egypt, South Africa, Greenland Europe European Region 2 DVDs may be sub-coded D1 through D4. D1 identifies a UK-only release. D2 a identify European DVDs that are not sold in the UK and Ireland. D4 identifies DVDs that are distributed throughout Europe. GB 4 ** Safety and Warning ** ** ** ** ** Safety and Warning ** ** ** ** This digital terrestrial receiver has been manufactured to satisfy international safety standards. Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 90 -250V AC 50/60Hz Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult local power company. Disconnect the receiver from the mains before you start any maintenance or installation procedure 2. OVERLOADING Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock. 3. LIQUIDS The receiver should not be exposed to any liquids such as dripping or splashing. In addition, no objects filled with liquids, such as vase, shall be placed on the apparatus. 4. CLEANING Disconnect the receiver from the wall outlet before cleaning. Use a light damp cloth (no solvents) to dust the receiver. 5. VENTILATION The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do not stand the receiver on soft furnishings or carpets. Do not stack elec...