Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
Warning: To avoid traffic accidents, never wear headphones when driving a car or riding a bicycle. Charging the built-in battery To charge the battery: 1 Turn off the player. The battery charges only when the power to the player is turned off. 2 Connect the supplied AC power adapter to the DC input jack on the player, then plug the adapter into an AC power outlet. When the battery is charging, the charge indicator LED turns red. When the battery is fully charged the indicator turns off. 3 Unplug the AC power adapter when the battery is fully charged. Notes: - While the charging is in progress, do not disconnect the AC power adapter until the charge indicator LED turns off. The charging time of a battery is about 5 hours and depends on environmental conditions. -To maximize battery life, immediately recharge it when it is fully discharged. - Ni-Mh batteries do not have a “memory effect” and can be recharged at any time, regardless of whether the battery is fully or only partially discharged. - The battery may get warm when you are charging it or operating the player. This is not a defect. Using the remote control To use the remote control: 1 The first time you use the remote control, remove the plastic sheet from the bottom of the battery to activate the remote. CR2025 Open Push 10 Playing video and audio discs 10 Playing video and audio discs 2 To use the remote control, point it at the remote sensor on the player. (Operate in the range of 10 feet (3.3 meters) and 60° ). 30 0 30 0 3 Remove the batteries if the remote control will not be used for an extended period of time. Tip: Generally, batteries last for about one year. Replace the batteries if the remote control does not work. Playing video and audio discs Turning on the player To turn on the player: 1 Open the LCD screen. 2 Turn on the player. The power LED lights green and the LCD screen turns on. Playing discs To load and play a disc: 1 Press the OPEN button to open the disc tray. 2 Hold the edges of the disc and place the disc in the center of the tray with the label side up. 3 Press the OPEN button to close the disc tray. The player starts playing the disc. 4 Turn the VOLUME knob to adjust volume (even when using headphones). If the player is connected to a TV or an amplifier, adjust the volume on the connected device. 5 Stop playback by pressing the STOP button on the player or remote control. Pausing discs To pause a disc: 1 When playing a disc, press (play/pause) to pause playback. 2 Press (play/pause) again to resume playback. Advanced setup 11 Advanced setup 11 Removing discs from the player To remove a disc from the player: 1 Press the OPEN button to open the disc tray, then remove the disc. 2 Press the OPEN button to close the disc tray, then turn off the player. Using with headphones You can also use the player with headphones (optional) by plugging the headphones into the headphone jack on the left side of the player. Plugging headphones into the headphone jack disables the internal speakers. Warning: To avoid damaging your hearing, set the volume to a low level before putting on the headphones, then adjust the volume up to a comfortable level. Advanced setup Making optional connections DC 9V CHG AV OUT VOL. OFF ON Video - Yellow Audio (L) - White Audio (R) - Red Connecting to a TV or another monitor To connect to a TV or another monitor: • Connect black mini-plug to the AV OUT jack on the DVD player. • Connect the yellow plug to the VIDEO IN jack on the TV. • Connect the red plug to the AUDIO IN R jack on the TV. • Connect white plug to the AUDIO IN L jack on the TV. Connecting to TV and amplifier To connect to a TV and amplifier: • Connect black mini-plug to the AV OUT jack on the DVD player. • Connect the yellow plug to the VIDEO IN jack on the TV. • Connect the red plug to the AUDIO IN R jack on the amplifier. • Connect white plug to the AUDIO IN L jack on the amplifier. 12 Advanced setup 12 Advanced setup Using the setup menu To access the setup menu: 1 With no disc in the player, press SETUP on the remote control or MENU on the player. The General Setup Page of the setup menu opens and the General Setup icon is highlighted. 2 Press ENTER. TV Display is highlighted. 3 Press or to select a sub-menu on the General Setup Page. 4 Press to open the selected sub-menu. 5 Press or to select an option, then press ENTER to confirm your selection. 6 Press to return to the previous menu. 7 Repeat Steps 3 to 5 to set the other menu options. Changing setup options Normal/PS—Select this option when the player is connected to a normal TV. Wide-screen images are shown on the screen, but with some parts cropped automatically. Normal/LB —Select this when the player is connected to a normal TV. Wide-screen images are shown on the screen, with a black band on the top and bottom. Advanced setup 13 Advanced setup 13 Wide—Select this when the player is connected to a wide-screen TV. Angle Mark On—The screen shows the angle mark icon if an angle option is ava...