Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Those are video encoding techniques in MPEG4 standard, like DivX have. *1 GMC – Global Motion Compensation *2 Qpel – Quarter pixel Audio Files Sampling frequency: within 8 to 48KHz (MP3), within 32 to 48KHz ( WMA) Bit rate: within 8 to 320 kbps (MP3), within 32 to 192kbps ( WMA) yDo not extract the USB device during operation (play, etc.). yA USB device which requires additional program installation when you have connected it to a computer, is not supported. yUSB device: USB device that supports USB1.1 and USB2.0. yMovie, music and photo files can be played. For details of operations on each file, refer to relevant pages. yRegular back up is recommended to prevent data loss. yIf you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. ySome USB device may not work with this unit. yDigital camera and mobile phone are not supported. yUSB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. , Note of USB Device (DVX642 only) Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL” 8 Getting Started 1 Getting Started Remote control • • • • • • • • • • c• • • • • • • • • • DVD MENU: Accesses or exits the DVD menu. ? TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • d• • • • • • • • • • A-B: Repeats a section. REPEAT: Repeats a chapter, track, title or all. ZOOM: Enlarges video image • • • • • • • • • • a• • • • • • • • • • POWER (1): Switches the unit ON or OFF. OPEN/CLOSE (B): Opens and closes the disc tray. Numerical buttons: Selects numbered items in a menu. CLEAR: Removes a track number on the Program List. PROGRAM: Enters the program edit mode. • • • • • • • • • • b• • • • • • • • • • SCAN (c/v): Searches backward or forward. SKIP (C/V): Goes to the next or previous chapter / track / file. PAUSE/STEP (M): Pauses playback. PLAY (z): Starts playback. STOP (Z): Stops playback. ?: This button is not available. Battery Installation Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 4 and 5 matched correctly. Getting Started 9 Getting Started 1 Front panel a Disc Tray b Display Window c Remote Sensor d B (Open/Close) e d (Play) Rear panel f C/V (Skip) g Z (Stop) h 1 (Power) i USB Port (DVX642 only) a AC power cord d VIDEO OUTPUT b DIGITAL AUDIO OUTPUT (COAXIAL) e COMPONENT / PROGRESSIVE SCAN OUTPUT ( Y PB PR) c AUDIO OUTPUT (Left/Right) 10 Connecting 2 Connecting to your TV Connecting RCA to SCART cable Using the RCA to SCART cable, connect the RCA cable ends to the corresponding VIDEO/AUDIO OUTPUT jacks on the unit and connect the scart cable to the scart socket on the T V. Connecting VIDEO IN RCA to SCART Cable TV Rear of the Unit Connecting Component Video cable Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on the TV using Component video cable, such as Y with green, Pb with blue, and Pr with red. Component Cable Rear of the Unit TV yIf your TV accepts progressive format signals, you must use this connection and set [Progressive Scan] to [On] on the setup menu.(See page 12) yYou should still connect the AUDIO cable between the unit and TV. yIf the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. yTo see the audio format of the current disc in the on-screen display, press AUDIO. yThis unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. , Connecting 11 2 Audio Cable Receiver / Amplifier Rear of the Unit Connecting Connecting COAXIAL (digital audio) cable Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jacks to the corresponding jack on your amplifier. OPTCALRear of the Unit Receiver / Amplifier Coaxial Cable Connecting to an Amplifier Connecting Audio cable Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. • If your T V is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 kHz] on the setup menu. • If your T V is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. Note 12 System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. Adjust the Setup Settings You can change th...