Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Connecting OPTICALCoaxial Cable Amplifier/ Receiver Rear of the Unit • If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 KHz] on the setup menu (See page 12). • If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 12). 2 12 System Setting 3 System Setting Setup When the unit is turned-on at the first time, you have to select the desired language. (optional) Adjust the settings You can change the settings of the player in the [SETUP] menu. 1. Press SETUP. 2. Select the first setup option using ws and press d to move to the second level. 3. Select a second setup option using ws and press d to move to the third level. 4. Select a desired setting using ws and press ENTER to confirm. 5. Press SETUP to escape from setup menu. [LANGUAGE] Menu Menu Language/Disc Audio/Disc Subtitle/Disc Menu Select and set the language you prefer. [DISPLAY] Menu TV Aspect Select and set TV aspect ratio according to your TV type and preference. [4:3]: Standard TV type [16:9]: Wide TV type Display Mode Select and set Display Mode according to your preference. Display Mode works only when the TV Aspect mode is 4:3. [Panscan]: Display full screen with cut non- main scene on TV [Letterbox]: Display wide screen with black stripe at top and bottom on TV Progressive Scan Check whether your TV can accept the progressive signal. If your TV accepts it, you can enjoy accurate color with high quality by selecting [On]. If there is any error after setting to Progress Scan, you have to initialize the unit by pressing and holding STOP for five seconds. [AUDIO] Menu Set the player’s Audio options according to various disc output type you use. Dolby Digital / DTS / MPEG Select the type of digital audio signal to use the DIGITAL AUDIO OUT jack. [Bitstream]: Select to connect DIGITAL AUDIO OUT jack to an amplifier with Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select to connect DIGITAL AUDIO OUT jack to an amplifier without Dolby Digital or MPEG decoder. [Off ] (for DTS): Select to connect DIGITAL AUDIO OUT jack to an amplifier without DTS decoder. Sample Freq. (Frequency) Selects the sampling frequency of the audio signal between [48KHz] and [96KHz]. DRC (Dynamic Range Control) To adjust the volume level by itself when Audio level reaches to more than the specific level (Dolby Digital only). Vocal (DVX640/DVX642 only) To mix the vocal with music using the multichannel karaoke DVD. System Setting 13 [LOCK] Menu Move to [Area Code] by pressing d. Press ENTER after input the 4-digit password. Input the same 4-digit with password again to verify and press ENTER. The Rating and Password menu will be activated. Rating Input the 4-digit password and press ENTER. Select the level from 1(Kids) to 8 (Adult). Change Password Input the former 4-digit password. Input the new 4-digit password and input it again to verify. If you forget the password Remove the disc. Input “210499” on Setup menu and press ENTER. The password will be cleared. Area Code To input the standardized area code refer to the Area Code List on page 18. [OTHERS] Menu B.L.E (Black Level Expansion) Select [On] or [Off ] to expand the black level or not. It just operates when TV system is set to NTSC. REC Bitrate (DVX642/DVX647K only) To select bitrate when you record from Audio CD to USB directly. Higher bitrate gives better sound quality. For detailed recording method, see page 16. Score (DVX642/DVX647K only) The score can be displayed after singing a song with microphone. Select [On] in Score to use this function. The score is displayed only when a chapter, title or track is fully finished. Fanfare sounds with the high score. DivX VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an o. cial DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivXVideo-on-Demand(VOD)movies.To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx. com for more information on how to complete your registration. [Register]: Displays the registration code of your unit. [Deregister]: Deactivate your unit and display the deactivation code. 3 System Setting 14 Operating 4 Operating On-Screen display You can display and adjust various information on- screen about the loaded disc and USB Device. Displaying content information on-screen ry 1. Press DISPLAY to see the various playback information. 2. Select an available contents by pressing wsadand ENTER. 3. Change an available content by pressing the numerical button and ENTER. 4. Press DISPLAY to escape from playback information. Current title number/total number of titles Current chapter number/ total number of chapters Elapsed playing ...