Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
• RANDOM Plays tracks in random order. 10 Identification of Controls (continued) Insert the battery (Lithium battery) NOTES • Do not expose the remote control sensor to bright light. • Do not place obstacles between the remote control sensor and the remote control. V VV Replacing the button-type battery The battery normally lasts for about a year. Replace the battery if the remote control fails to operate the unit when used within operation range. Button-type battery (Lithium battery) 1. Pinch the battery holder clip together then pull the tab to remove the battery holder. 2. Insert the battery with the + facing in the same direction as the + on the battery holder. 3. Replace the battery holder with battery into the remote control unit making sure that it is fully inserted. NOTES • Replace remote control unit battery with 3V micro lithium cells such as CR. 2025 or its equivalent. • Dispose of battery safety in accordance with local laws. Do not dispose of in fire. Warning : The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F). Replace the battery with Matsushita Elec. Ind. Co., Ltd. (Panasonic), part no. CR. 2025 only. Use of another battery may present a risk of fire or explosion. Dispose of used batteries. Keep batteries away from children. Do not disassemble or dispose of in fire. Introduction 11 Power Connections AC Adapter Follow steps 1 to 2 to connect. When disconnecting, reverse the order. Caution •Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or shock. •Do not connect or disconnect the power plug with wet Doing so may cause electric shock. •Do not use an AC adapter other than one specified, as it can cause a fire or damage to the player. AC adapter • This AC adapter operates on 100-240V~ 1.5A 50-60Hz. • MODEL NO. : DPAC1T • Manufactured by WANLIDA Digital Technology Co., Ltd. • Contact an electrical parts distributor for assistance suitable AC plug adapter or AC cord set. 12 Power Connections (continued) This DVD player and its automotive adapter are designed for use in vehicles that have 12 volt, negative ground Automotive electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the Adapter DC power system cannot be used. Follow steps 1 to 2 to connect. When disconnecting, reverse the order. Cigarette lighter socket To the DC inlet To the Automotive adapter outlet Caution Automotive adapter •To prevent electrical shock and possible damage to your DVD player or • This automotive adapter operates on DC 12V. vehicle, always unplug the automotive adapter from the cigarette lighter • MODEL NO. : DPDC1 socket before you remove the plug from your DVD player. • Manufactured by WANLIDA Digital Technology Co., Ltd. • A 3 amp. 250V fuse for protection is installed in the automotive adapter. • Contact an electrical parts distributor for assistance in selecting • While the engine is being started, disconnect the automotive adapter a suitable automotive adapter. from the car’s cigarette lighter socket. • Do not operate your DVD player when the car battery is discharged. current from the car generator may cause the DC fuse to blow. •If the vehicle’s supply voltage drops below approximately 10 volts, your DVD player may not work properly. •Do not leave your DVD player in a place where the temperature 70°C (158°F), or the pick-up device may be damaged. Examples include: - Inside a car with the windows closed and in - Near a heating appliance. Introduction 13 Power Connections (continued) Battery Pack Charge the battery pack before using it for the first time. NOTES • Do not detach the battery pack during playback. A Attaching the battery pack • Be careful not to drop the battery pack. 1. Match the hooks of the battery pack into the holes on the A Detaching the battery pack bottom of the player. 1. Press the RELEASE knob. 2. Press and slide the battery pack until the hooks click. 2. Pull the battery pack until the hooks click. Hooks 2 1 1 2 ATTENTION The product that you have purchased contains The battery is recyclable. At the end of it’s useful life, under various state and local into the municipal waste stream. Check for details in your area for recycling options or proper 14 Power Connections (continued) A Charging the battery pack A Recharging and play times 1. Attach the battery pack to the player. 2. Connect the AC power adapter to the player and the plug into an AC outlet. Player Battery Pack CHG.CHG. Recharging Play time Standby LCD On LCD Off Approx. Approx. Approx. 3 hour 3.5 hours* 4 hours * When Brightness control is set to initial mode. AC adapter cord Charge indicator A Press “Display” to display the battery status on the screen. insert jack (DC IN 9.5V) 3. During recharging, charge indicator is red. If recharging is complete, charge indicator changes to gr...