Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the audio/video cable (not supplied). To Audio (R) Input To Audio (L) Input To Video InputAudio (L) Output Audio (R) Output Video Output DVD/VCR TV AUDIO/VIDEO cable (not supplied) Connect to a TV with S-Video Output (for DVD playback) If your TV has an S-VIDEO input, you can get higher quality by connecting it with the S-VIDEO output of the unit using the S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit. DVD/VCR TVS-Video cable (not supplied) To Audio (R) Input To Audio (L) Input S-Video Output AUDIO cable (not supplied) Audio (L) Output Audio (R) Output S-VIDEO/COMPONENT Video selector switch To S-Video Input Connect to a TV with Component Video Output (for DVD playback) You can enjoy high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the COMPONENT video cables (not supplied). COMPONENT VIDEO cable (not supplied) TV DVD/VCR To Component Video Input To Component Video Output AUDIO cable (not supplied) Audio (L) Output Audio (R) Output To Audio (R) Input To Audio (L) Input NOTES: • When you connect to a TV with S-video jack or component jacks, set the S-VIDEO/COMPONENT Video selector switch to the desired position. And also you must select the corresponding video input on your TV. • When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the display window is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals and you cannot see any picture. To turn off the PROGRESSIVE indicator, make the Progressive scanning mode inactive (see page 35). Connect to a Stereo Amplifier with Audio Output Connect to a Stereo Amplifier with Audio Output You can enjoy high quality audio by connecting the audio output to your amplifier. Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier. To Audio (L) Input To Audio (R) Input AUDIO cable (not supplied) Stereo Amplifier DVD/VCR Audio (R) Output Audio (L) Output Connect to an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output. Use this connection to connect an: • AV amplifier with built-in *Dolby Digital decoder • AV amplifier with built-in *DTS decoder Video cable (not supplied) To Video Input AV Amplifier with built-in various DVD/VCR TV NOTE: You may connect to a TV with a Coaxial Digital Audio Output Video Output Component video cable (not supplied) Coaxial digital cable (not supplied) decoder as above or S-Video cable (not supplied) instead of a video cable (not supplied). Connecting the optical digital cable You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital cable. When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel. When not using the optical digital cable, attach the dust protection cap to protect against dust. NOTES: • The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT) are useful only for DVD section. The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/VHF OUT. • When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. • Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers. • DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is necessary. • When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs. • Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit. Auto clock setting Auto clock setting The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel signal. NOTES: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • Both the VCR and the DVD have their own menu option (See page 35). • If no buttons are pressed for more than 60 seconds, the MENU screen will return to normal TV-operation automatically. • When shipped from factory, the “Tim...
Dieses Handbuch ist für folgende Modelle:DVD-Player - PV-D734S (2.34 mb)