Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
onto a video tape with this DVD/VCR. CH 110 INDEX To stop recording To stop recording Auto Rewind feature This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape. Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. To stop recording temporarily Press PAUSE/STILL to avoid recording unwanted material. “ ” will appear on screen for about 4 seconds. Press again to continue the recording. NOTES: • The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode. • You can select a recording channel in the recording pause mode. Recording one program while watching another While the VCR is recording, press TV/VCR to select the TV position. The “VCR” will go off and recording will continue. Select the TV channel you want to watch by using the TV channel selector. NOTE: Some CATV hookups do not permit viewing one channel while recording another. See pages 14,15. To Display VCR operation Status Press DISPLAY. The clock, day of the week and more information will be indicated. While watching TV DAY OF THE WEEK CLOCK CH 1258 : 47AM MON 00 : 00 : 00 SP STEREO SAP CHANNEL STEREO AND SECOND AUDIO PROGRAM (SAP) TAPE SPEED REAL TIME COUNTER While operating a tape 8:30AMMON00:15:12SPHI-FI OPERATING MODE HI-FI STEREO AUTO REPEAT TAPE IN To cancel the display: Press DISPLAY until all indicators disappear. One-touch Timer Recording (OTR) One-touch Timer Recording (OTR) The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording. NOTE: If you wish to watch the DVD playback during the OTR, press VCR/DVD to change to DVD mode and perform the DVD playback (see page 36). Preparation: • Turn ON the TV and set to the video input mode. • Press VCR/DVD to select the VCR mode. (The VCR indicator will light.) Example: One-touch Timer Recording for 30 minutes. 1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. 2 2 Press SPEED to select the desired tape speed SP or SLP. The tape counter and SP or SLP will appear on the screen for about 4 seconds. 00 : 00 : 00 SP Set the TV/CATV option to the appropriate position (See page 3 3 22). TV - VHF/UHF channels CATV - CABLE TV channels 4 Press Number keys or CH / to select the channel to be recorded. CH 110 5 Press REC/OTR. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours. The OTR and recording time will appear on the screen for about 4 seconds. And, REC will keep blinking in the display. Press Recording time PressRecording time once NORMAL REC 6 times3:00 twice 0:30 7 times4:00 3 times 1:00 8 times5:00 4 times 1:30 9 times 6:00 5 times 2:00 10 times NORMAL REC CH110INDEXOTR0:30 To cancel OTR Press STOP or turn off the power. “ ” will appear on screen for about 4 seconds. Timer recording Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. NOTES: • If the clock symbol( ) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply. Press and hold PROG TIMER for more than 1 second to cancel the timer program or press EJECT to remove the cassette tape. • During timer recording standby mode, the VCR mode cannot be selected. To use the VCR, press and hold PROG TIMER for more than 1 second at first, then press VCR/DVD to change to VCR mode. After you use the VCR, press and hold PROG TIMER for more than 1 second again to put the VCR into timer recording standby mode. • If you press and hold PROG TIMER for more than 1 second during timer recording, the recording operation will be interrupted. If you press and holdPROG TIMER for more than 1 second again within the programmed time, the recording operation will start again. • After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock (see pages 18-20) and reprogram any timer recordings. Preparation: • Press VCR/DVD to select the VCR mode. Load a cassette tape with the erase prevention tab intact. • Press the DISPLAY button to verify that the time and date are correct (see page 29). Example: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP). 1 Press VCR MENU. Select the “TIMER REC SET” option , then press ENTER. a+/-/ENTER/MENUnMENUTIMERRECSETAUTOREPEATONOFFONOFFSAPCHSETUPSYSTEMSETUP 2 2 Press SET + or – to select one of the program line, then press ENTER. 3 Press SET + or – to select the date, then press ENTER. a+/-/ENTER/CANCEL/MENUn DATE START END CH – a+/-/ENTER/CANCEL/MENUn DATE START END CH 26(SU) 4 4 Set...
Dieses Handbuch ist für folgende Modelle:DVD-Player - PVD744S (2.34 mb)