Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
and Panasonic Canada Inc. Customer Care Centre in Canada. In the U.S.A., call 1-800-211-7262, e-mail consumerproducts@panasonic.com, or visit In Canada, call 905-624-5505 or visit Problem Solution Page No power. Check connections to the AC adaptor or battery pack. 10, 11 Release the hold mode. 15 Confirm the battery charge on the unit's display. 11 You cannot turn on the unit with the remote control if the unit is powered by the battery pack. 15 Unit turns off automatically. The unit turns off after it has been stopped for about 15 minutes {5 minutes when using the battery pack) to conserve power. Turn the unit on again. 15 Cannot charge battery pack or the [CHG] indicator fails to light. Charging is only possible in standby mode. 11 The charging time increases if the battery pack is warm and charging may not be possible under some circumstances. Wait for the battery pack to cool off. — Check connection to the AC adaptor. 10 Unit doesn’t work when powered by the battery pack. The battery pack has protection circuitry that activates if the pack becomes too hot or too cold. The battery pack will not work if this occurs. Use the unit at about 20 C (68 °F). Play fails to start or stops soon after starting. Condensation may have formed in the unit. Wait an hour for it to clear. — This unit cannot play discs other than those specified. 8 Wipe the disc clean. 9 Ensure the disc is inserted correctly. 14 Check the ratings setting. 27 No response when buttons are pressed. Some discs prohibit certain operations. 8, 14 Release the hold mode. 15 If there is no response at all, the unit may have been affected by lightning or static electricity. Try turning the unit off and on again. Alternatively, turn the unit off, disconnect the power source (AC or battery pack) reconnect the power and turn the unit on again. — No operation with remote control. Check that the battery is inserted correctly. 10 Replace the battery if it is drained. 10 Aim the remote control at the remote control signal sensor. 10 Troubleshooting Guide Problem Solution Page A menu is shown after playing each song on a Karaoke DVD. Most Karaoke DVDs are designed to do this. Some discs have an item in the menu that allows you to play all the songs. — The audio soundtrack or subtitle language cannot be changed. Languages can only be selected if they are recorded on the DVD. — Some DVDs require you to change the languages through menus. 19 Subtitles not shown. Subtitles appear only if they are recorded on the DVD. — Turn the subtitles on with the On-Screen Menu Icons. 19 Subtitles may fail to appear around the A and B points in A-B repeat, and around the points you marked to play again. — Angles cannot be changed. Angles can only be selected if they are recorded on the DVD. There may be parts of multi-angle DVDs where different angles are not recorded. — You have forgotten your ratings password. Do the following to reset the unit to its original factory settings. While the unit is stopped, press and hold [11], [K<] (backward), and [►, ON] on the main unit for about 3 seconds until the message “Initialized” disappears from the television, then turn the unit off. — You want to reset the unit to the factory settings. There is a lot of noise. Separate the unit from mobile phones if they are being used close to each other. — No sound from other speakers. Turn up the volume. 35 Check all connections and settings. 32-38 Check input mode of the other equipment. — Some parts of the soundtrack are missing. Ensure the settings are appropriate to the speakers you have connected. 36 Turn V.S.S. off if you have connected this unit to other equipment with a stereo connection cable and are using 3 or more speakers. 24 The picture is disrupted during fast forward and rewind. Some disruption is normal. — No picture on the television (or the size of the picture seems wrong). Check connections. 12 Check that the television is on. — Check that the input mode on the television is correct. — Have you made the correct settings in “5 TV Aspect”? 13 Try changing the screen mode on the television. 30 40 VQT8644 NO PLAY The unit cannot play this disc. 8 "bAT Err" and a number appear on the display. “bAT Err 1”: A problem has occurred with the battery pack. Consult your dealer. “bAT Err 2”: The pack has been recharging for 12 hours but has failed to recharge for some reason. Recharge again. “bAT Err 3”: The battery pack has overheated during recharging. Allow the pack to cool down before recharging again. — Messages do not appear on the television. Go to the initial settings menu and turn the On-Screen Messages on. 28 On-Screen Menu Icons are cut off or are not displayed at all. Go to the initial settings menu and change the position of the On-Screen Menu Icons. 28 U11 Wipe the disc clean. 9 H □□ □□ stands for a number Trouble has occurred. The number appearing after H depen...