Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
.Aspect 4:3/Aspect 16:9: STEP3Set up to match your television and remote control Television operation 12 RQT7392 Getting started POWER VOLUME CHINPUT SELECT DVD POWER TV TV/VIDEO 1 HDD SD/PCDVD 2 3 4 5 6 7 8 0 9 CM SKIP AUDIO PAGE CH CANCEL VCR Plus+ SKIP STOP PAUSE PLAY/x1.3 SLOW/SEARCH FUNCTIONS ENTER DIRECT NAVIGATOR TOP MENU RETURNSUB MENU CHAPTER SETUP Info PROG/CHECK TV GUIDE REC MODEERASE REC STATUS TIME SLIPDISPLAY DUBBING 3,4,2,1 ENTER RETURN SETUP Numbered buttons TV operation buttons Selecting television type You do not have to change the setting when connected to a 4:3 standard aspect television that is not compatible with progressive output (. page 53). 1 Press [SETUP]. 2 Press [3, 4] to select “TV Screen” and press [1]. 3 Press [3, 4] to select “TV Type” and press [ENTER]. SETUP Set Up Disc Video Audio Display TV Screen Channel TV Type Aspect 4:3 & 480I Aspect 4:3 & 480P Aspect 16:9 & 480P Aspect 16:9 & 480I 4:3 16:9 4:3 standard aspect 16:9 widescreen television television .480P/480I: Select “480P” if the television is compatible with progressive output. 4 Press [3, 4] to select the item and press [ENTER]. You can configure the remote control TV operation buttons to turn the television on/off, change the television input mode, select the television channel and change the television volume. Point the remote control at the television While pressing [I POWER TV], enter the code with the numbered buttons. e.g., 01: [0] . [1] Manufacturer and Code No. Panasonic PHILIPS (RC-5) 03 National QUASAR 01, 02 RCA 05 SAMSUNG 14, 18, 19 FISHER 10 SANYO 10 GE 05 SHARP 06, 07 GOLDSTAR 15, 16, 17 SONY 08 HITACHI 12 SYLVANIA 03 JVC 11 THOMSON 05 LG 15, 16, 17 TOSHIBA 09 MAGNAVOX 03 ZENITH 04 MITSUBISHI 13 Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation. .If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television. To exit the screen Press [SETUP]. To return to the previous screen Press [RETURN]. When other Panasonic products respond to this remote control When other Panasonic products respond to this remote control Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together. Use “1”, the factory set code, under normal circumstances. 1 Press [SETUP]. 2 Press [3, 4] to select “Set Up” and press [1]. 3 Press [3, 4] to select “Remote Control Code” and press [ENTER]. 4 Press [3, 4] to select the code (1, 2, or 3) and press [ENTER]. SETUP Disc Remote Control Code Channel Set Up Press ± and ENTER together for more than 2 seconds on the remote. 5 To change the code on the remote control While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds. 6 Press [ENTER]. . When the following indicator appears on the unit’s display The unit’s remote control code Change the code on the remote control to match the main unit’s (. step 5). To exit the screen Press [SETUP]. To return to the previous screen Press [RETURN]. 13 RQT7392 Getting started HDD, disc and card information HDD and discs you can use for recording and play Type Logo Instructions Getting started Hard disk drive (HDD) .160 GB Indicated in these instructions with [HDD] Temporary storage .You can record up to 284 hours [in EP (8H) mode] (. page 17, Recording modes and approximate recording times). .You can view the title being recorded from the beginning (Chasing playback, Time Slip) – (. page 18). .You can record digital broadcasts that allow “One time only recording”. You can transfer (dub) a recorded title to a CPRM compatible DVD-RAM; however, the title is erased from the HDD (. page 53). .You can play and transfer (dub) still pictures taken on a digital camera etc. (. page 28, 42). DVD-RAM .4.7 GB/9.4 GB, 12 cm (5z) .2.8 GB, 8 cm (3z) [RAM] Re-writable discs for backup use .You can record up to 16 hours [in EP (8H) mode on double-sided disc. You cannot record or play continuously on two sides.] (. page 17, Recording modes and approximate recording times). .You can view the title being recorded from the beginning (Chasing playback, Time Slip) (. page 18). .Scratch and dust resistant cartridge discs and large capacity double sided discs (9.4GB) are commercially available. .You can record digital broadcasts that allow “One time only recording” when using CPRM (Content Protection for Recordable Media) compatible discs (. page 53). You cannot transfer (dub) a recorded title. .This unit is compatible with 1k–3k recording speed discs. .You can transfer (dub) up to 24 k recording speed by using a high speed recording compatible disc (. page 37). .You can play and transfer (dub) still pictures taken on a digital camera etc. (. page 28, 42). DVD-R .4.7 GB, 12 cm (5z) .1.4 GB, 8 cm (3z) [DVD-R] One time recording discs for backup use (recordable...
Dieses Handbuch ist für folgende Modelle:DVD-Player - DMR-E95H (3.16 mb)