Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: MicroBoards Technology Dateigröße: 769.29 kb Dateiname: Unterrichtssprache:

Ready to Update Autoloader The Autoloader displays a progress screen as the update loads. Updating... 33% When the update is complete, the autoloader displays this message. Power Update Complete! down the Autoloader and power the system back on to complete the update. Please restart 13. Loader Utilities The Loader Utilities menu consists of these submenus: .. Drive Alignment • Spindle Alignment • Disc Separator • Z form maneuver • Alignment Protection Each submenu has a section that describes it. 13.1 Drive Alignment The Drive Alignment menu option is used to check the alignment of the drive trays to the robotic arm. When the Drive Alignment function is selected, the system picks a disc from the first input spindle and moves it to just (1/4 inch) above the drive tray and holds it there. To start the alignment, place a disc on to the first input spindle. Up or Down button to select the Drive Alignment menu and Loader Utilities Use the OK button to enter that menu. The system will proceed to the Please Select Drive menu. 1. Drive Alignment press the Please Select Drive Use the Up or Down button to select the drive that you want to align Drive 1 Go? and press the OK button to select it. 30 • Operation MICROBOARDS TECHNOLOGY, LLC HCL Series The autoloader will pick a disc from the first input spindle, move it to . inch Drive Alignment above the drive tray, and hold it there. You will see the Drive Alignment Alignment Finished? screen: Check the alignment of the drive trays and press the OK button when you are finished. Note: If the drive trays are not properly aligned and there is a need to re-align them, please contact Tech Support Service for information regarding setting alignments. Warning: This function is ONLY for checking the alignment, NOT for setting the alignment. Please do not move the robotic arm with your hands during this process. When you have finished checking the alignment of the drive(s), the robotic arm will move the disc to the arms top position and hold it there. You will see the Alignment Next menu. Press the OK button to return back to the Please Select Drive menu. This allows you to complete the alignment checking procedure for each of the installed drives. If you are through checking the alignment of drives, press the ESC button to go back to the Loader Utility Menu When the drive alignment checking process is complete, the robotic arm will drop the disc in the Reject Area. 13.2 Spindle Alignment The Spindle Alignment menu option is used to check the alignment of the spindles to the robotic arm. When the Spindle Alignment function is selected, the system picks a disc from the first input spindle and holds it approximately one inch above the target spindle. To start the alignment, place a disc on to the first input spindle. Loader Utilities 2. Spindle Alignment Use the Up or Down button to select the Spindle Alignment menu and press the OK button. The autoloader will proceed to the Please Select Spindle menu. Please Select Spindle Use the Up or Down button to select the spindle that you want to Spindle 1 Go? check and press the OK button to select it. The autoloader will pick a disc from the input spindle, move it to one inch above the spindle being aligned, and hold it there. You will see the Spindle Alignment screen: Warning: This function is ONLY for checking the alignment, NOT for setting the alignment. Please do not move the robotic arm with your hands during this process. Once you are done, press the OK button. This will send you to the Alignment Next menu Press the OK button to return back to the Please Select Spindle menu. Spindle Alignment This allows you to complete the alignment checking procedure for each of Alignment Next? the installed spindles. If you are through checking the alignment of spindles, press the ESC button to go back to the Loader Utility Menu. When the spindle alignment checking process is complete, the robotic Drive Alignment arm will drop the disc in the Reject Area. Alignment Next? 13.3 Disc Separator The Disc Separator option is used to circumvent the disc static and sticky media problem. See Disc Static and Sticky Media on page 5. When this option is enabled, after picking up a disc from the input spindle, the robotic arm stops at the top of it’s travel and then bounces down once, twice, or three times to dislodge discs that are stuck together. To enable the disc separator function: Loader Utilities Use the Up or Down button to select the Disc Separator menu and 3. Disc Separator press the OK button to enter that menu. Use the Up or Down button to select the separator option from the 4 available: Off, Single Vibration, Double Vibration, or Triple Vibration. Press the OK button to select the option displayed. 13.4 Z form Maneuver Some drives have bezels that extend out from the front of the drive face. This can cause the disc to catch on the edge of the bezel of a higher drive as it is being lowered into one of the below drives. Enabling the Z form Maneuv...

Herunterladen

Geben Sie zwei Ziffern: