Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Daewoo Dateigröße: 3 mb Dateiname: Unterrichtssprache:

Scart Connection 1 Plug a scart cable into the scart socket EURO AV1 at the back of the DVD Recorder+VCR and the corresponding scart socket at the back of the TV set. (V) 2 Plug a scart cable into the blue scart socket EURO AV2/DECODER at the back of the DVD Recorder+VCR and the corresponding scart socket at the back of the Decoder. S-Video Connection ANTENNA INPUT YPbPr COMPONENT/PROGRESSIVE VIDEO INPUTS-VIDEO INPUT RVS C Rear of DVD Recorder+VCR 1 Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using Video cable (S). 2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks your TV using the audio cables. Component Video Connection 1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding in jacks on your TV using a Y Pb Pr cable (C) if the component (Y, Pb, Pr) is available on your TV. 2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the audio cables. Progressive Scan Connection • If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD Recorder+VCR’s Progressive Scan output for the highest video resolution possible. • If your TV does not accept the Progressive Scan format, the picture will appear scrambled. 1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding in jacks on your TV using an optional Y Pb Pr cable (C). 2 Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the audio cables. • Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds (or changing the ‘Video Output’ in the Setup Menu; see page 27). • Progressive Scan does not work with the RF, Audio/Video or S-Video connections. 16 Connecting an Amplifier/ Connecting to an amplifier equipped Connect the Left and Right AUDIO your amplifier, receiver, or stereo system, Connecting to an amplifier equipped with with a multi-channel decoder (Dolby Digital 1 Connect the DVD Recorder+VCR’s DIGITAL AUDIO amplifier. Use an optional digital coaxial audio cable. 2 You will need to activate the DVD Recorder+VCR’s digital Digital Multi-Channel Sound? A digital multi-channel connection provides the best sound quality. audio/video receiver that supports one or more of the audio formats (MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the • Due to the DTS Licensing agreement, the digital output will be in DTS digital out selected. • If the audio format of the digital output does not match the capabilities of your receiver, the a strong, distorted sound or no sound at all. • 5.1 channel digital surround sound via the digital connection can only be obtained if your receiver a digital multi-channel decoder. • To see the audio format of the current DVD on the on-screen display, press [AUDIO]. The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multichannel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVD Recorder+VCR’s digital audio outputs. Rear of DVD Recorder+VCR AUDIO INPUT DIGITAL INPUT COAXIAL A X Amplifier (Receiver) CONNECTIONS Connections Initial Initial Connecting Optional Initial Installation To receive audio/video signals Jack Panel of Accessory Component After successfully connecting the AVF jacks on the DVD Recorder+(VCR, Camcorder, etc.) devices, this chapter will show jacks on your external component, • You must follow the initial installation cables. channels, and language preferences for the 1 A ‘Welcome‘ message is displayed on the screen. from your antenna or cable TV jack is connected. initial installation. 2 Select the desired language for the on-screen menu using … /† ]. Press [ENTER] to confirm. Front of DVD Recorder+VCR 3 Select the desired country using [ …/† ]. Press [ENTER] to confirm. Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RW recorder and digitally transfer DV tapes or DVD+R/RW discs to DVD+R/RW. Use a DV cable (not supplied) to connect the DV In/Out jack of your DV camcorder/video deck to the front panel DV IN jack of the DVD Recorder+VCR. Connecting a Digital Camcorder This jack is for connection to DV equipment only. It is not compatible with digital satellite tuners or D-VHS video decks. DV Digital Camcorder 4 Select the desired disc menu language using [ …/† ]. Press [ENTER] to confirm. 5 Select the desired disc playback audio language using [ … /† ]. Press [ENTER] to confirm. DF-8100P/8150P only DV IN/OUT Front of DVD Recorder+VCR 19 Installation Please select your language to begin auto install procedure: English Spanish French Czech Danish German Dutch Instructions Enter-Confirm Setup-Exit Move …† Installation Please select your country of use: Australia ...

Herunterladen

Geben Sie zwei Ziffern: