Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 7.5 mb Dateiname: Unterrichtssprache:

If the picture still does not appear, repeat the steps and try other options. , The recorder is connected to an input device that is not HDCP compliant (page 18). , When picture noise appears after you change the “Screen Resolution” setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. TV programme reception does not fill the screen. , Set the channel manually in “Manual CH Setting” in the “Tuner” setup (page 119). , Select the correct source using the INPUT button, or select a channel of any TV programme using the PROG +/– buttons. TV programme pictures are distorted. , Reorient the TV aerial. , Adjust the picture (refer to the TV’s instruction manual). , Place the recorder and TV farther apart. , Place the TV and any bunched aerial cables farther apart. , The aerial cable is connected to the AERIAL OUT jack on the recorder. Connect the cable to the AERIAL IN jack. , The recorder’s colour system is different from your TV. Hold down x (stop) on the recorder, and press INPUT on the recorder to change the recorder’s colour system. TV channels cannot be changed. , The channel is skipped (page 119). , A timer recording started, which changed the channels. The picture from equipment connected to the recorder’s input jack does not appear on the screen. , If the equipment is connected to the LINE 1/DECODER jack, select “L1” in the front panel display by pressing INPUT. If the equipment is connected to the LINE 2 IN jacks, select “L2” in the front panel display by pressing INPUT. , When “Standby Mode” is set to “Mode 1” (default) in the “Basic” setup, input signals from the LINE 1/DECODER jack are not output from the LINE 3 – TV jack. Set “Standby Mode” to “Mode 2” in the “Basic” setup (page 118). The playback picture or TV programme from the equipment connected through the recorder is distorted. , If the playback picture output from a DVD player, VCR, or tuner goes through your recorder before reaching your TV, the copy-protection signal applied to some programmes could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. The picture does not fill the screen. , Set “TV Type” in the “Playback” setup in accordance with the screen size of your TV (page 128). The picture does not fill the screen, even though the picture size is set in “TV Type” in the “Playback” setup. , The picture size of the title is fixed. The picture is black and white. , Check that “LINE 3 Out” in the “Video In/ Out” setup is set to the appropriate item that conforms to your system (page 122). , If you are using a SCART cord, be sure to use one that is fully wired (21 pins). Additional Information ,continued GUIDE Plus+ system (RDRAT105/ AT107/AT205 only) GUIDE Plus+ system does not appear. , 1Even if you complete “Easy Setup,” TV programme listings do not appear until the recorder receives the GUIDE Plus+ data. 2Turn off the recorder, but ...

Herunterladen

Geben Sie zwei Ziffern: