Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
You cannot use POWER or REC button while “NOW WRITING TIME STAMP” is displayed. 27 Advanced Operation Weak Signal Display ON/OFF When “ON” is selected, picture is displayed even when broadcast signal is weak or nonexistent. Display MAIN MENU. Press ACTION. 2 MAIN MENU SELECT:A Y 4 ► KEY SET : ACT I ON KEY Display SET UP CH screen. 1) Press AT^ ► to select "CH.” 2) Press ACTION to display. 3 SET UP CHANNEL ANTENNA : CABLE AUTO SET CHANNEL CAPTI ON WEAK SIGNAL DISPLAY:OFF SELECT:* ▼ KEY SET :► KEY END .ACTION KEY Select WEAK SIGNAL DISPLAY. 1 ) Press AT to select. 2) Press ► to set “ON” or “OFF." r™ rCH •o Eo 6 + s * -o ?o “ON” = Picture is displayed regardless of signal condition, and may not always be clearly visible. "OFF’ = Screen turns solid blue when signal is absent or weak. If unit is connected to equipment which has blue back feature, selecting “ON” will have no effect on the other equipment. _2SELECT/SET CH UP CH DOWN VOL UP VOL DOWN 4 ACTION O Return to the normal screen. Press ACTION twice. VCR Lock All operations are prohibited except Timer recording and tape eject. Useful for families with small children. VCR LOCK ACTIVATED REC O VCR LOCK OFF To turn “ON.” In stop mode, hold down REC on the unit without a cassette inserted for 7 seconds. To turn “OFF.” Repeat above with or without cassette. VCR Lock is canceled automatically after about 24 hours if clock is set. Model VV-2000 unit is shown here. 28 For assistance, call 1-800-211-PANA(7262) Copy Your Tapes (Dubbing) Connections you’ll need to make. Playing (Source) VCR AUDIO VIDEO O-I o IN FROM © ant. OUT TO TV ® Recording (Editing) unit Playback (Source) VCR Recording (Editing) unit 1 Insert prerecorded tape. y/'( <1 Insert blank tape with record tab. • Dubbing tapes protected with Copy Guard will have poor quality results. 2 Select “LINE” mode. See “Selecting Input Mode” section on page 13. 3 point. Put in Standby PAUSE mode. ICRECDI ip. I=ll PAUSE Press PLAY then PAUSE at starting lOj C_) SLOW Put in Standby mode. Press REC, then PAUSE/SLOW immediately. Start dubbing. PAUSE Start dubbing. Press PLAY. o Press PAUSE/SLOW SLOW Stop dubbing. Press STOP/ EJECT. Stop dubbing. Press STOP. • Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. 29 Advanced Operation V-Chip Control Feature V-Chip Feature is... The unit has built-in V-Chip Control which allows you to block unwanted TV usage based on US MOVIES and US TV PROGRAMS ratings. Enter Secret Code Process of V-Chip Feature Enter Code i=> Setup|Q Blocking A 4-digit code must be entered to view a blocked program or change rating settings. Display MAIN MENU. ACTION r 7 O Press ACTION. 2 SELECT:* ▼ •* ► KEY SET :ACTI ON KEY Display SET UP TV screen. 1 ) Press AT^ ► to select “TV.” 2) Press ACTION to disniav. 3 _ SET UP TV UtMM CAPTION INPUT SELECT VIDEO ADJUST TUNER SELECT SET END * ▼ KEY ► KEY ACTION KEY Select Lock. 1 ) Press AT to select. 2) Press ► to display. 4 LOCK ENTER 4-DIG IT CODE a— SELECT:* ▼ KEY END : ACT I ON KEY Enter your secret code. 1) Press AT to select a number. 2) Press► { or <) to set. rVOL rCH >o (O 5 t 1 A
Tragbare Kassettenspieler - VV1300 (1.69 mb)
DVD-Player - OMNIVISION VV-1300 (1.69 mb)
DVD-Player - OMNIVISION VV-2000 (1.69 mb)
DVD-Player - OMNIVISION VV-1310W (1.69 mb)