Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
• To set virtual surround on/off. Within about23 feet (7m) –8– EN Front Panel Display OPEN/CLOSE STOP/EJECT PLAY REC /OTR TIMER REC F.FWD REWPOWER CHANNEL OUTPUT PLAY FWD/SKIPSTOP SKIP/REV DVD VCR DISC IN VIDEO AUDIO Lights up when the inserted disc is being played back. Flashes when an unaccept- able disc is installed. Lights up when the timer recording Lights up during a recording. Flashes when a recording is paused. Lights up when the disc is inserted. or an OTR recording has been set. VCR/DVD Switching Because this product is a combination of a VCR and a DVD player, you must select first which component you wish to operate with the OUTPUT button. VCR MODE Press the VCR button on the remote control. (Verify that the VCR OUTPUT light is lit.) DVD MODE Press the DVD button on the remote control. (Verify that the DVD OUTPUT light is lit.) Note • Pressing only the OUTPUT button on the front panel DOES NOT switch the mode of the remote control. You MUST select the correct mode on the remote control. OPEN/CLOSE STOP/EJECT PLAY REC /OTR TIMER REC F.FWD REWPOWER CHANNEL OUTPUT PLAY FWD/SKIPSTOP SKIP/REV DVD VCR DISC IN VIDEO AUDIO OUTPUT SKI DVD VCR OUTPUT button DVD OUTPUT light VCR OUTPUT light DVD button VCR button POWER DISPLAY VCR DVD PAUSE SLOW VCR/TV SKIP/CH. PLAY STOP REC/OTR MENU SETUP TOP MENU MODE SUBTITLE T-SET ANGLE ENTER RETURN SEARCH MODE REPEAT A-B OPEN/CLOSE /EJECTSPEED AUDIO CLEAR/ C. RESET 1 2 3 4 5 6 7 8 9 0 +1 0 V.SURR Setup –9– EN Preset for Use Turn on the unit for the first time VCRVCR VCR 11 Turn on the TV and set it to channel 3. • If channel 3 is already occupied for broadcasting, see“RF Output Channel” section. Setup 22 LANGUAGE SELECT B ENGLISH [ON] FRANCAIS ESPANOL POWER 33 CH 01 AUTO SET UP YYeses Press the MENU button to exit • Refer to “Hint for Cable Box or Satellite Box” section on page 6. Do you connect the cab the satellite box to the D YES NO TV ScreenRemote Control or No NoNo Please wait for a few minutes. After scanning... • The tuner stops on the lo channel. •You can select only the channels memorized in this unit b buttons. • If "AUTO SET UP" appears on the screen again, chec Then, press the B button once again. Hint HintHint • Repeat these steps only if either there was a power failure or this unit has been unplugged for more than 30 seconds. To Select a Channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press 1,1,7) • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). To Preset the Channel Again 1) Press the MENU button until the main menu appears. 2) Select "CHANNEL SET UP" by pressing the K or L button. Then, press the B button. 3) Select "AUTO SET UP" by pressing the K or L button. Then, press the B button. After scanning, the tuner stops on the lowest memorized channel. To Change the On-Screen Language 1) Press the MENU button until the main menu appears. 2) Select "LANGUAGE SELECT" by pressing the K or L button. Then, press the B button. 3) Select "ENGLISH" , "FRANCAIS" or "ESPANOL" by pressing the K or L button. Then, press the CLEAR/C.RESET button. Hint HintHint • If you accidentally select Spanish or French and need English: Press the MENU button and choose SELEC. IDIOMA, or SELECTION LANGUE. Press the B button, and select ENGLISH. Finally, press the CLEAR/C.RESET button. Clock Set Up VCRVCR VCR 1 11-MENU MENU TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP B CLOCK SET LANGUAGE SELECT or • If the clock is not set, the CLOCK SET screen appears when you press the MENU button. In this case, go to step [2]. 22 CLOCK SET MONTH DAY YEAR 0 3 / – – – – – – HOUR MINUTE AM/PM – – : – – – – 33 CLOCK SET MONTH DAY YEAR 0 3 / 1 5 – – – – HOUR MINUTE AM/PM – – : – – – – Select the current month Select the current day or or 55 44 CLOCK SET MONTH DAY YEAR 0 3 / 1 5 2 0 0 4 HOUR MINUTE AM/PM – – : – – – – CLOCK SET MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE AM/PM 0 5 : – – – – 66 CLOCK SET MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE AM/PM 0 5 : 4 0 – – 77 CLOCK SET MONTH DAY YEAR 0 3 / 1 5 MON 2 0 0 4 HOUR MINUTE AM/PM 0 5 : 4 0 P M AM B PM Select the current year Select “AM” or “PM” Select the current hour Select the current minute or or or or 8 88 To exit the CLOCK SET screen. Hint HintHint • To go back one step, press the s button (during the steps [2] to [7].) • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds. –10– EN VCR Functions Playback HintHint • When a tape with- out record tab is inserted, the DVD/VCR will start playback automati- cally. • Tracking will be automatically adjusted upon play- back. To adjust the tracking manually, press the CHAN- NEL buttons. VCR OPEN/CLOSE STOP/EJECT PLAY REC /OTR TIMER REC F. FWDREWPOWER C...