NEVER TOUCH THE MOVING PARTS Never touch the moving parts such as blades, bits, cutters and others. CAUTION DON'T FORCE TOOL It will do the job better and safer at the rate from which it was intended. USE RIGHT TOOL Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use tool for purpose not intended - for example - don't use circular saw for cutting tree limbs or logs. DON'T ABUSE CORD Never carry tool by cord or yank it to disconnect from receptacles. Keep cord from

This will help prevent the inhalation of the fine dust produced while using this tool. Prolonged breathing of dust particles may lead to future respiratory problems. Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or reproductive harm. Some examples of these chemicals are: • Lead from lead-base paints • Crystalline Silica from bricks, cement and other masonry products. • Arsenic and Chromium f

Each component has been rigorously tested to ensure the highest level of acceptance. The John Deere Air Hammer is designed for medium duty applications. This tool features a quick change retainer which allows easy replacement of chisels, a heat treated steel piston and barrel for long life, and front exhaust which clears away chipped material. This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation, maintenance and troubleshooting

Each component has been rigorously tested to ensure the highest level of acceptance. The John Deere 1/2-Inch Reversible Air Drill is designed for heavy duty applications requiring power and easy operation. Applications include honing, drilling, reaming and wire brushing. Features a convenient side-mounted reverse lever, through handle exhaust and an adjustable side handle. This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation, m

HEARING PROTECTION IS RECOMMENDED Hearing protection should be used when the noise level exposure equals or exceeds an 8 hour time- weighted average sound level of 85 dBA. Process noise, reflective surfaces, other tools being operated nearby, all add to the noise level present in your work area. If you are unable to determine your noise level exposure, we recommend the use of hearing protection. WEAR RESPIRATORY PROTECTION It is advisable, when using this tool for extended periods of time, to we

Verify tool direction before starting. Do not change direction of tool while tool is running. Do not force tool, allow drill to work at designed pace. 3/8-Inch Reversible Drill Operator's Manual Installation Designed to operate on 90 PSIG, lower pressure (below 90 PSIG) will reduce performance of the tool while higher air pressure (over 90 PSIG) raises the performance of the tool beyond its rated capacity and could cause serious damage to tool and user. Always use clean dry air. Excessive moistu

The tool should be stored in a clean and dry environment. Recommended lubricants: Use John Deere AT-4003 air tool oil or any other high grade turbine oil containing moisture absorbent, rust inhibitors, metal wetting agents and an EP (extreme pressure) additive. 3/8-Inch Power Ratchet Wrench Operator's Manual Troubleshooting Troubleshooting Loss of Power 1. Low air pressure 2. Improper lubrication or dirt build up 3. Worn motor parts, or other problems 1. Check air supply. For rated performance,

READ OPERATING INSTRUCTIONS Always become familiar with all the instructions and warnings before operating any pneumatic tool. ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ ALL INSTRUCTIONS BEFORE OPERATING THIS TOOL AND ESPECIALLY POINT OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE OPERATOR. 1/4-Inch Power Ratchet Wrench Operator's Manual ALWAYS WEAR APPROVED EYE PROTECTION Impact resistant eye protection should meet or exceed the sta

Process noise, reflective surfaces, other tools being operated nearby, all add to the noise level present in your work area. If you are unable to determine your noise level exposure, we recommend the use of hearing protection. WEAR RESPIRATORY PROTECTION It is advisable, when using this tool for extended periods of time, to wear a protective mask. This will help prevent the inhalation of the fine dust produced while using this tool. Prolonged breathing of dust particles may lead to future respir

Dealer will give additional directions. If unable to resolve satisfactorily, write to the Mi-T-M® Corporation at address below, giving dealer’s name, address, date, and number of dealer’s invoice, and describing the nature of the defect. Title and risk of loss pass to buyer on delivery to common carrier. If product was damaged in transit to you, file claim with carrier. Mi-T-M® Corporation, 8650 Enterprise Drive, Peosta, IA 52068 1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235 Monday - Friday