Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
AMBI-SND NOISE ADJUST -SELECT t * ADJUST* Favorite program setting Press FAVORITE button for long time to enter the menu as right figure. Press CH+/- to select the favorite program and VOL+/- to adjust the channel. You could set 8 favorite programs. After the setting, press FAVORITE button to select your favorite channel you have set . Shuttle Press SHUTTLE for long time to set the program you are watching as the shuttle channel. If you want to back to this channel from the current channel, press SHUTTLE button once . I Tuning There are three ways of searching: automatic search, manual search and MFT (manual fine tune). You may operate it either on the TV or on the remote control. Here is mainly about the remote control. Automatic search Automatic search 1. Press MENU button continuously, until select TUNING menu. TUNING POS EDIT ■* POS EX. -► SEARCH UP AUTO MEMORY -► SELECT * ADJUST *4 2. Press CH+/- button to move the indicator to AUTO MEMORY. TUNING POS EDIT ■* POS EX. ■* SEARCH UP AUTO MEMORY -► SELECT ♦ ADJUST *4 3. Press VOL+, then AUTO MEMORYmode will work. The TV set will search automatically all available programs, after that, all available programs will be stored in turn and the TV set will return to the first channel. S ARCH U 0 _696. 25MHz STOP <■ • If you want to stop the search, just press VOL- button. • The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed. After searching • Press CH+/- button to check the channels. • If the color is abnormal in a certain channel, it may be the color system has not been set properly, so you should adjust it to the proper system (Reference to page 7).
Bohrmaschinen und Schrauber - SMART TEMP 15F6B (1.77 mb)
Bohrmaschinen und Schrauber - SMART TEMP 15F6B (1.77 mb)
Bohrmaschinen und Schrauber - SMART TEMP 21F7A (1.77 mb)
Bohrmaschinen und Schrauber - SMART TEMP 21F9D (1.77 mb)