VESR92x models are equipped an additional RJ45 Ethernet port. This port allows you to connect a local Ethernet device to the network and functions like an Ethernet switch. It does not matter which port is used for the network connection and the local connection. • Connect the serial device(s) : o RS-232 with DB9: straight- through for DCE device, null modem for DTE device o RS-232/ 422/485 with terminal blocks: see Appendix D for pinouts LLEEDD SSttaattuuss 3 LED STATUS Ready Blinks if system is

The user may change this. Default is 255.255.255.0 Gateway The Gateway IP address allows users to access the Serial Server from outside the LAN. MAC Address The MAC address is fixed and cannot be changed. It is assigned in the factory. Every Ethernet device manufactured has it own unique MAC address. Version & Date The currently loaded version of the firmware, and when it was released, is shown here. Link Status Link status automatically displays the type of Ethernet connection. It will either d

) -- 2 Receive Data RXD In RXDB (+) - 3 Transmit Data TXD Out TXDB (+) Data B (+) 4 Data Terminal Ready DTR Out TXDA ( . ) Data A ( . ) 5 Signal Ground GND --- GND GND 6 Data Set Ready DSR In CTSA ( . ) -- 7 Request To Send RTS Out CTSB (+) -- 8 Clear To Send CTS In RTSB (+) -- 9 Ring Indicator RI In RTSA ( . ) Figure 11. Serial Connection Pin- outs for RS-232/RS-422/RS-485 N NNo oot tte ee: :: For more information on RS-232, RS-422 and RS-485 pin-outs, cable connections and loopback connections

Step 2: Select the Search all reachable servers check box, then click OK. Figure 38. The Search Setup Window Manual Documentation Number: ESP901- 902- 3704 Chapter 6 43 B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815- 433- 5100 - Fax 815- 433- 5104 – B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91- 792444 – Fax +353 91- 792445 – Installing Virtual COM Port The program searches the LAN for all available Serial Servers. When

(Use a null cable if the serial device is a DTE.) □ In a web browser on your PC, type in the IP address and access the Web Configuration and Management Interface □ Login using the username 'root' and password 'dbps' □ In the Configuration, Network page configure your Wireless LAN, Security and other settings to work on the type of wireless network you will be connecting to. □ In the Configuration, Serial Ports page select the Port Profile you require for use with your application (E.g. RealP