Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
RDS/ PTY Views the various displays of the RDS options. 23. CLEAR Removes a track number on the program menu. 24. TV -Controlling the TV Your remote control is capable of operating your DVD/CD Receiver as well as limited functions of LG TV. Follow the instructions below to operate your LG TV. Setting Remote Control Codes for LG TV 1.Hold POWER (TV) and press CHANNEL(v/V) button repeatedly until the TV on or off. 2..The POWER (TV), CHANNEL(v/V), VOLUME (+/-), and INPUT buttons on remote control are used to operate the LG TV. Note: If the remote control does not operate your particular TV, try the other code or use the remote control originally supplied with the LG TV. (LG and Gold Star)Due to the variety of codes used by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every LG TV model. Setup Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 8 to 9. a b d e a LANGUAGE - Menu Language/ Disc Audio / Subtitle / Menu b DISPLAY -TV Aspect / Display Mode / Progressive Scan / TV output select c AUDIO - 5.1 Speaker Setup/ Dynamic Range Control (DRC)/ Vocal d LOCK (Parental Control) - Rating / Password / Area Code e OTHERS - DivX(R) VOD / REC Bitrate To display and exit the Menu:Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Press B on the Remote Control. To go back to the previous level:Press b on the Remote Control. GENERAL OPERATION 1. Press SETUP. The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP or PLAY to exit the Setup menu. LANGUAGE Menu Language: Select a language for the Setup menu and the on-screen display. Disc Audio / Subtitle / Menu: Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original – Refers to the original language in which the disc was recorded. Other – To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 12. If you enter the wrong language code, press CLEAR. DISPLAY TV Aspect 4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected. Display Mode: The display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Progressive Scan Progressive Scan Video provides the high quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set [Progressive Scan] to [On]. Press ENTER. -If you not press ENTER within 10 seconds it will be [OFF]. - If you have no progressive scan TV ,in the state progressive scan [on] will not appear the screen. (so then,press and hold STOP button on the remote control 5seconds. it will be change [OFF].) TV Output Select – Select an option according to the TV connection type. [YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN jacks on the unit. [RGB]: When your TV is connected with the SCART jack. -When connected by RGB, COMPONENT OUT not operate. -In Progressive scan [on] state, TV Output select mode is inactivate. AUDIO Each DVD disc has a variety of audio output options. Set the receiver’s AUDIO options according to the type of audio system you use. 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Press ENTER and 5.1 Speaker Setup menu appears. 2. Use b / B to select the desired speaker. 3. Adjust options using v / V / b / B buttons. 4. After setting, returns to the previous menu by pressing RETURN button. Speaker selection Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)] Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement. Size: Since the speaker settings are fixed, you cannot change the settings. Volume: Press b / B to adjust the output level of the selected speaker. (-6dB ~ 6dB) Distance: If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This all...