Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Press Cursor2 button to move to .Setup. and then press ENTER button. MOVE ENTER EXIT MOVE ENTER RETURN EXIT 49 GB Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. 1 1 In Stop mode, press MENU button. MOVE ENTER EXIT 3 3 In the Speaker Setup, press the ENTER button MOVE ENTER RETURN EXIT Press Cursor2 button to move to .Audio. and then press ENTER button. MOVE ENTER EXIT 4 ,Press Cursor , , buttons to move to the desired speaker and then press ENTER button. . For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows: SMALL . NONE. . For L and R, the mode is set to SMALL. MOVE CHANGE RETURN EXIT SETUP SMALL : Select this when using the speakers. NONE : Select this when no speakers are connected. Note . Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 50 Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 2 2 Press Cursor button 1 1 In Stop mode, to move to .Audio. and press MENU then press ENTER button. button. MOVE ENTER EXIT MOVE ENTER EXIT 51 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers. . With (Dolby Pro Logic II), the delay time may be different for each mode. . With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. . The Center channel is only adjustable on 5.1 channel discs. Note GB 4 , ,Press Cursor Press Cursor button 3 3 Press Cursor , , buttons to move to move to .DELAY to set the Delay to the desired speaker TIME. and then press 5 time. and then press ENTER button. ENTER button. . You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC. MOVE ENTER EXITRETURN MOVE SELECT RETURN EXIT MOVE CHANGE RETURN EXIT 52 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAK- ER placement It is desirable to place all speakers within this circle. Ideal SUR- ROUND SPEAKER placement 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Delay Time Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Distance between Df and Ds 0 inch 40.8 inches 6.7 feet 10.0 feet 13.4 feet 16.7 feet 0 inch 13.6 inches 27.2 inches 40.8 inches 4.5 feet 5.6 feet SETUP Setting the Test Tone Use the Test Tone feature to check the speaker connections. In Stop or no Press Cursor 1 button to move todisc mode, .Audio. and then 2 press MENU press ENTER button. button. MOVE ENTER EXIT MOVE ENTER EXIT Press Cursor button3 to move to .TEST TONE. and then press ENTER button. . The test tone will be sent to L . C . R . SR . SL . SW in order. If the ENTER button is pressed again at this time, the test tone will stop. MOVE ENTER RETURN EXIT STOP EXIT Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Alternate method: press the TEST TONE button on the remote. Press TEST TONE button. Multi-Channel Pro Logic Mode L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R) . Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. . Use this function to check that each speaker is correctly connected and that there is no problem. To end the test tone, press TEST TONE button again. Start 53 GB Setting the DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietist sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 1 In Stop or no disc mode, press MENU button. MOVE ENTER EXIT 3 3 Press Cursor button to move to .DRC. and then press ENTER button. 2 2 Press Cursor button to move to .Audio. and then press ENTER button. MOVE ENTER EXIT 4 Press Cursor , to adjust the .DRC.. . When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller. SETUP MOVE ENTER RETURN EXIT CHANGE RETURN EXIT Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 54 Setting the Audio You can adjust the balance an...
Dieses Handbuch ist für folgende Modelle:Heimkino-Systeme - HT-TQ22 (8.23 mb)
Heimkino-Systeme - HT-TQ25 (8.23 mb)