Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Heimkino-Systeme - BDV-N790W (4.17 mb)
Heimkino-Systeme - BDV-N790W (4.28 mb)
Anleitung Zusammenfassung
x[Software License Information] You can display the Software License Information. [External Input Settings] The skip setting is a convenient feature that allows you to skip unused inputs when selecting a function. x[HDMI1]/[HDMI2]/[TV]/[AUDIO] [Do not skip]: The system does not skip the selected function when selecting the function by pressing FUNCTION. [Skip]: The system skips the selected function when selecting the function by pressing FUNCTION. [Network Settings] x[Internet Settings] Connect the system to the network beforehand. For details, see “Step 3: Preparing for Network Connection” (page 21). [Wired Setup]: Select this when you connect to a broadband router using a LAN cable. [Wireless Setup(built-in)]: Select this when you use the wireless LAN that is built into the system for wireless network connection. [View Network Status]: Displays the current network status. • For further details, visit the following website and check the FAQ: For customers in Europe and Russia: For customers in other countries/regions: x[Network Connection Diagnostics] You can run the network diagnostic to check if the network connection has been made properly. 50GB x[Connection Server Settings] x[Connection Server Settings] x[Renderer Set-up] [Automatic Access Permission]: Sets whether or not to allow automatic access from a newly detected DLNA controller. [Smart Select]: Allows a Sony DLNA controller to find the system as the target component to operate by using the infrared ray. You can set this function to on or off. [Renderer Name]: Displays the system’s name as it is listed on other DLNA devices on the network. x[Renderer Access Control] Sets whether or not to accept commands from DLNA controllers. x[PARTY Auto Start] [On]: Starts a PARTY or joins an existing PARTY at the request of a networked device compatible with the PARTY STREAMING function. [Off]: Off. x[Media Remote Device Registration] Registers your “Media Remote” device. x[Registered Media Remote Devices] Displays a list of your registered “Media Remote” devices. x[Remote Start] [On]: Permits turning on the system from the “Media Remote” device. [Off]: Off. [Easy Setup] x[Easy Initial Settings] Runs [Easy Initial Settings] to make the basic settings. Follow the on-screen instructions. x[Easy Network Settings] Runs [Easy Network Settings] to make the basic network settings. Follow the on-screen instructions. [Resetting] x[Reset to Factory Default Settings] You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset. x[Initialize Personal Information] You can erase your personal information stored in the system. Settings and Adjustments 51GB Additional Information Additional Information On safety • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the system, or place the system near water, such as near a bathtub or shower room. Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further. • Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock. On power sources • Unplug the unit from the wall outlet (mains) if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord. On placement • Place the system in a location with adequate ventilation to prevent heat build-up in the system. • At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction. However, touching the cabinet should be avoided. Do not place the system in a confined space where ventilation is poor as this may cause overheating. • Do not block the ventilation slots by putting anything on the system. The system is equipped with a high power amplifier. If the ventilation slots are blocked, the system can overheat and malfunction. • Do not place the system on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots. • Do not install the system in a confined space, such as a bookshelf or similar unit. • Do not install the system near heat sources such as radiators, air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. • Do not install the system in an inclined position. It is designed to be operated in a horizontal position only. • Keep the system and discs away from components with strong magnets, such as microwave ovens, or large loudspeakers. • Do not place heavy objects on the system. • Do not place metal objects in front of the front panel. They may limit reception of radio waves. • Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment. • If you use a pacemaker or other medical device, consu...
Dieses Handbuch ist für folgende Modelle:Heimkino-Systeme - BDV-N890W (2.83 mb)
Heimkino-Systeme - BDV-N990W (2.83 mb)