Stimmen - 5, Durchschnittliche Bewertung: 3.6
(
)
)
|
Anleitung Zusammenfassung
• The audio cables are not connected securely. • Connect the audio cables securely. • The power of the equipment connected with the audio cables is turned off. • Turn on the equipment connected with the audio cables. The playback picture is poor. • The disc is dirty. • Clean the disc. • Tape heads are dirty. • Clean video heads. • Tape is a rental or was recorded on another VIDEO. • Use CH/PRESET (+/–) for manual tracking adjustment while tape is playing. The DVD/VCR Receiver does not start playback. • No disc is inserted. • No tape is inserted. • Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, color system, and Regional code.) • The disc is placed upside down. • The disc is not placed within the guide. • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • The disc is dirty. • Clean the disc. • The Rating level is set. • Cancel the Rating function or change the rating level. Forward Skip is not available during DVD playback. • The current chapter is last of the current title. • Move to next title using DVD on-screen display (See page 20). The remote control does not work properly. • The remote control is not pointed at the remote sensor of the DVD/VCR Receiver. • Point the remote control at the remote sensor of the DVD/VCR Receiver. • The remote control is too far from the DVD/VCR Receiver. • Operate the remote control within 7 m (23 ft). • There is an obstacle in the path of the remote control and the DVD/VCR Receiver. • Remove the obstacle. • The batteries in the remote control are exhausted. • Replace the batteries with new ones. • This remote control uses the same buttons for VIDEO and DVD functions (ex. PLAY). • When using a VIDEO, first press the VIDEO button. When using a DVD, first press the DVD button. 44GB Troubleshooting (Continued) Symptom Cause Correction REFERENCE The tape does not run during recording. • The DVD/VCR Receiver is in the RECORD PAUSE MODE. • Press X (PAUSE) to resume recording. The tape will not rewind or fast-forward. • The tape is already fully rewound or fast-forwarded. • Check the tape. The playback picture does not appear while the tape is running. • If you’re using only the RF cable for connection. • Set the TV to the Video channel (see page 15). Noise appears during visual search. • This is normal. • Turn camcorder on and operate properly. Noise appears during normal playback. • The automatic tracking mode is engaged. • Try manual tracking (see page 24). Breaks are noticeable in Hi-Fi soundtrack. • The automatic tracking mode is engaged. • Try manual tracking (see page 24). Recording cannot be started. Tape-to-tape editing is not possible. Timer recording won’t work. PLEASE CHECK appears when entering VIDEO Plus+ programming number. No Hi-Fi sound. No NICAM sound recording. • There is no tape loaded, or the tape loaded has had its record safety tab removed. • DVD and VIDEO is working simultaneously. • The source (another VIDEO, camcorder) has not been properly connected. • The clock/or the timer have been set incorrectly. • The timer is not engaged. • The loaded tape has had its record safety tab removed. • Incorrect the VIDEO Plus+ programming number. • Audio mode is not set properly. • NICAM mode is not set properly. • Insert a tape, or using adhesive tape, cover the hole where the tab was removed. • Set the function mode to VIDEO mode by pressing DVD/VCR on the front panel or VIDEO on the remote control. Press x (STOP) to stop the working then press REC. • Confirm that the camcorder is properly connected. • Re-perform the clock and/or timer settings. • Press @ / 1 and confirm that the timer indicator is displayed on the DVD/VCR Receiver’s Display. • Insert a pate with adhesive tape, or insert a tape with the record safety tab intact. • Re-enter the VIDEO Plus+ programming number. • Select “STEREO” by repeatedly pressing AUDIO on the remote control. • Make sure NIC in the menu is set to “AUTO” for the station to be recorded. Moisture Condensation Moisture condensation can occur: • When the DVD/VCR Receiver is moved from a cold place to a warm place. • Under extremely humid conditions. In locations where moisture condensation may occur: • Keep the DVD/VCR Receiver plugged into an AC power outlet with POWER On. This will help prevent condensation. • When condensation has occurred, wait a few hours for the DVD/VCR Receiver to dry before using it. Video Head Cleaning The dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. 45GB Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity AC 230 V , 50/60 Hz 74W 430 x 98 x 386 mm (17 x 3 ...