Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Settings and Adjustments CEN DISTc) (center distance) 1.6mb) SL LEVELb) Adjusts the left level of the (surround surround speaker (–6 dB to +6 left level) dB, 1 dB increments). 0a) SR LEVELb) Adjusts the right level of the (surround surround speaker (–6 dB to +6 right level) dB, 1 dB increments). 0a) SB LEVELb) Adjusts the level of the (surround surround back speaker (–10 back level) dB to +10 dB, 1 dB increments). 0a) SURR DISTc) (surround distance) 1.6mb) SB DISTc) (surround back distance) 1.6mb) Center speaker distance can be moved up to 1.6 meters closer to the listening position from the front speaker distance, in 0.2 meter increments. Surround speaker distance can be moved up to 4.6 meters closer to the listening position from the front speaker distance, in 0.2 meter increments. SW LEVEL Adjusts the level of the (subwoofer subwoofer (–6 dB to +6 dB, 1 level) dB increments). +4a) SP POSc) (surround speakers position) Surround back speaker distance can be moved up to 4.6 meters closer to the listening position from the front speaker distance, in 0.2 meter increments. SP BEHIND: Select this if surround speakers are located in the back area of the listening position. SP SIDE: Select this if surround speakers are located in the side area of the listening position. TEST TONE (test tone) F BALANCE (front balance) 0 CEN LEVELb) (center level) 0a) T. TONE OFF: The test tone is not emitted from the speakers. T. TONE ON: The test tone is emitted from both left and right speakers simultaneously while adjusting balance. When you select one of the “LEVEL” items, the test tone is emitted from each speaker in sequence. Adjusts the balance between the front left and right speakers. (You can adjust from the center 6 steps left (L6) or right (R6).) Adjusts the level of the center speaker (–6 dB to +6 dB, 1 dB increments). AUDIO DRC (dynamic compression) DRC OFF: No compression of DYNAMIC range. DRC ON: Reproduces the sound track with the kind of DYNAMIC range that the recording engineer intended. a) When you perform the Quick Setup (page 22), the default settings are changed. b) This setting appears when you set the corresponding speaker to “Y” in “SP SETUP” (page 79). a) This setting appears when you set “SURR SP” to “SURR Y” in “SP SETUP.” b) When you perform the Quick Setup (page 22), the default settings are changed. c) This setting appears when you set the corresponding speaker to “Y” in “SP SETUP” (page 79). continued 79GB xCUSTOMIZE DUAL MONO MAIN (dual mono) SUB MAIN+SUB MAIN/SUB For details, see “Enjoying Multiplex Broadcast Sound (DUAL MONO)” on page 64. SB DEC SB MATRIX (surround SB AUTO back SB OFF decoding) For details, see “Selecting the Surround Back Decoding Mode” on page 50. DIMMER DIM OFF (dimmer) DIM ON For details, see “Changing the Brightness of the Front Panel Display” on page 69. Quick Setup and Resetting the System (SETUP) Select [SETUP] in the setup display. For details, see “Using the Setup Display” (page 71). SETUP RESET QUICK x QUICK Normally, when you turn the system on for the first time or after resetting the system, the guide message appears on the TV screen and you can perform the Quick Setup. If you cancelled the Quick Setup and you want to perform the Quick Setup again, operate on this screen. See “How to use the Quick Setup” on page 22. Note After performing the Quick Setup, the settings of following items are changed. – [OSD], [DVD MENU], and [SUBTITLE] in [LANGUAGE SETUP] – [DISTANCE] and [LEVEL] in [SPEAKER SETUP] – [TV TYPE] in [SCREEN SETUP] x RESET You can reset the system. After you select [RESET] and press ENTER, select [YES] to reset the settings (it takes a few seconds to complete). Select [NO] and press ENTER to cancel. Do not press "/1, when resetting the system. Notes • When you select [RESET], all the settings return to the default. • When you turn the system on after resetting, the guide message appears on the TV screen. To perform the Quick Setup (page 22), press ENTER, to return to normal screen, press CLEAR. 80GB Additional Information Troubleshooting Sound There is no sound. • The speaker cord is not connected securely. • Press MUTING on the remote if “MUTING ON” is displayed in the front panel display. If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. • Check that the AC power cord (mains lead) is connected securely. The STANDBY indicator flashes. Immediately unplug the power cord and check the following items. • Are the + and – speaker cords short-circuited? • Are you using only the specified speakers? • Is anything blocking the ventilation holes on the top of the system? • Is the subwoofer connected incorrectly? After checking the above items and fixing any problems, connect the power cord again and turn on the system. If the indicator still flashes, or if the ...