Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Fotos und technische Daten Sony DAV-SR2 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
5 Press AMP MENU. Turns off the AMP menu. Enjoying the Radio Presetting Radio Stations You can preset 20 FM stations, and 10 AM stations. Before tuning, make sure to turn down the volume to minimum. TUNER/ BAND TUNING –/+ C/X/x/c/ ENTER TUNER MENU 1 Press TUNER/BAND repeatedly until the band you want appears in the front panel display. Each time you press TUNER/BAND, the band toggles between AM and FM. 2 Press and hold TUNING + or – until scanning starts, then release. Scanning stops when the system tunes in a station. “TUNED” and “ST” (for stereo program) appear in the front panel display. With cover opened. ST MHz 3 Press TUNER MENU. 4 Press C/c/x/X repeatedly until “MEMORY ?” appears in the front panel display. 66GB 5 Press ENTER. A preset number appears in the front panel display. ST 6 Press C/c/x/X to select/ the preset number you want. ST 7 Press ENTER. The station is stored. m ST MHz 8 Repeat 1 to 7 to store other stations. To change the preset number Restart from step 1. To change the AM tuning interval The AM tuning interval can be set to either 10 kHz (default) or 9 kHz (for some areas). To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the remote, or "/1 on the system. While holding down VOLUME + on the system, press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Listening to the Radio Preset radio stations in the system’s memory first (see “Presetting Radio Stations” on page 66). TUNER/ "/1 BAND FUNCTION DISPLAY TUNING –/+ x PRESET –/+ VOL +/– FM MODE With cover opened. 1 Press FUNCTION repeatedly until “FM” or “AM” appears in the front panel display. The last received station is tuned in. ST MHz 2 Press PRESET + or – repeatedly to select the preset station you want. Each time you press the button, the system tunes in one preset station. Each time you press TUNER/BAND, the band toggles between AM and FM. 3 Adjust the volume by pressing VOL +/–. To turn off the radio Press "/1. Other Operations continued 67GB To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or – on the remote repeatedly. For automatic tuning, press and hold TUNING + or – on the remote. Press x when you stop the automatic tuning. Tips • If an FM program is noisy, press FM MODE on the remote so that “MONO” appears in the front panel display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve reception, reorient the supplied antennas (aerials). To check the frequency or sound field Press DISPLAY repeatedly. Each time you press DISPLAY, the front panel display changes as follows: index name of the station* t frequency t sound field t index name of the station... * This is displayed if you have entered a name for a preset station (page 68). Naming Preset Stations You can enter a name of up to 8 characters for preset stations. These names (for example, “XYZ”) appear in the system’s front panel display when a station is selected. Note that no more than one name can be entered for each preset station. TUNER/ BAND FUNCTION PRESET –/+ C/X/x/c/ ENTER TUNER MENU 1 Press FUNCTION repeatedly until “FM” or “AM” appears in the front panel display. Each time you press TUNER/BAND, the band toggles between AM and FM. The last station you received is tuned in. Each time you press FUNCTION, the mode of the system changes in the following sequence: FM t AM t VIDEO t SAT t DVD t FM... 2 Press PRESET+ or – repeatedly to select the preset station you want to create an index name for. 3 Press TUNER MENU. 4 Press C/c repeatedly until “NAME IN?” appears in the front panel display. 5 Press ENTER. With cover opened. 68GB 6 Create an index name by using the cursor buttons: Press X/x to select a character, then press c to move the cursor to the next position. If you make a mistake Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character. Capital letters, numbers, and other symbols can be input for a radio station name. 7 Press ENTER. The station name is stored. Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. You can preset the time in 10 minutes decrements. SLEEP Other Operations Press SLEEP. Each time you press this button, the minutes display (the remaining time) changes as follows: AUTO t 90MIN t 80MIN t 70MIN Rr SLEEP OFF T 10MIN ..... 50MIN T 60MIN When you choose AUTO The system turns off when the current disc finishes playback (up to 240 minutes). The system turns off if you manually stop playing a disc. “AUTO” mode works only with functions such as DVD that is selected before setting to “AUTO.” To check the remaining time Press SLEEP once. You cannot check the remaining time if you select “AUTO.” To change the remaining time Pre...