Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
On operation • Before connecting other components, be sure to turn off and unplug the receiver. • The sound fields memorized for each input and the preset stations are retained for about a day even if you disconnect the AC power cord (mains lead). On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. 5GB Table of Contents WARNING ..............................................3 CAUTION................................................3 Precautions...............................................5 Controlling the connected components Programming the remote for TV operation (Sony TV only)..................................7 (Input SYNC) Programming the remote..........................8 Controlling the connected components......................................11 Settings and Adjustments Using the AMP menu.............................14 Setting up the speakers...........................14 Enjoying the sound at low volume.........15 (AUDIO DRC) Enjoying Multiplex Broadcast Sound....15 (DUAL MONO) Adjusting the Delay Between the Picture and Sound ........................................16 (A/V SYNC) Changing the Brightness of the Front Panel Display.............................................17 (DIMMER) Selecting the sound field........................17 Other operations Listening to the radio .............................19 Using the Radio Data System (RDS).....21 (European model only) Using the Sleep Timer ...........................21 Additional Information Troubleshooting .....................................22 Specifications.........................................24 Glossary .................................................25 Index to Parts and Controls....................27 6GB Controlling the connected components Programming the remote for TV operation (Sony TV only) (Input SYNC) Controlling the connected components Programming the remote for TV operation (Sony TV only) (Input SYNC) If you connect a Sony TV, follow the steps below to program the remote. The TV input will be selected automatically (Input SYNC). RM SETUP Input buttons Numeric buttons, etc. ENTER H X Mm . > -ENTERCLEAR x 1 Press the input button for the component you want to change while holding down RM SETUP. The indicator lights up. Note • Press the RM SETUP button using a pointed object. 2 See the table below for the remote button corresponding to the TV input jack you have connected to, and press the button. TV input jack* Remote Button VIDEO 1 1 VIDEO 2 2 VIDEO 3 3 VIDEO 4 4 VIDEO 5 5 VIDEO 6 6 VIDEO 7 7 VIDEO 8 8 TV input jack* Remote Button COMPONENT 1 9 COMPONENT 2 AUDIO COMPONENT 3 SUBTITLE COMPONENT 4 ANGLE * TV input jack name may differ depending on your TV model. 3 Press ENTER. The indicator slowly flashes twice and the remote automatically exits the programming mode. To disable this function Press ENTER while holding down 0 in step 2. The TV input will not be selected automatically even if you press the input buttons. Controlling the connected components 7GB Programming the remote You can program the remote to control non-Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. H X Mm . > -ENTERCLEAR RM SETUP AV ?/1 Input buttons Numeric buttons ENTER x 1 Press AV ?/1 while holding down RM SETUP. The indicator lights up. Note • Press the RM SETUP button using a pointed object. 2 Press the input button for the component you want to control. For example, if you are going to control a DVD player, press DVD. 3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control. See the tables on pages 9–11 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker’s code respectively). 4 Press ENTER. Once the numeric code has been verified, the indicator slowly flashes twice and the remote automatically exits the programming mode. 5 Repeat steps 1 to 4 to control other components. To cancel programming Press RM SETUP during any step. The remote automatically exits the programming mode. To activate the input after programming Press the programmed button to activate the input you want. If programming is unsuccessful, check the following: • If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. • If the indicator fla...