Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
SA-CD/CD AUDIO IN VIDEO 2 AUDIO IN VIDEO 1 AUDIO IN L R L R ANTENNA AMU OPT IN SA-CD/CD VIDEO 2 DVD OPT IN COAX INDIGITAL BAOPTICAL OUT LINE L R Super Audio CD/ CD player Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies. Note The sound is not output when you play a Super Audio CD on the Super Audio CD player connected to the SA-CD/CD OPTICAL IN jack on this receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to the operating instructions supplied with the Super Audio CD player. 8GB 1b: Connecting components with only analog audio jacks For details on the required cords (A–C), see page 6. Satellite tuner L R SA-CD/CD AUDIO IN VIDEO 2 AUDIO IN VIDEO 1 AUDIO IN R L R ANTENNA AMU OPT IN SA-CD/CD VIDEO 2 DVD OPT IN COAX INDIGITAL AALINE L R R OUTPUT L AAUDIO OUT OUTPUT AUDIO OUT OUTPUT L VCR Super Audio CD/ CD player Getting Started 9GB 2: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna SA-CD/CD AUDIO IN VIDEO 2 AUDIO IN VIDEO 1 AUDIO IN L R L R ANTENNA AMU OPT IN SA-CD/CD VIDEO 2 DVD OPT IN COAX INDIGITAL * AM loop antenna (supplied) (supplied) * The shape of connector varies depending on the area code. Notes • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible. 10GB 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.1 channel). Example of 5.1 channel speaker system configuration HT-SF800M only Front speaker (Right) Surround speaker (Right) Center speaker Front speaker (Left) Subwoofer Surround speaker (Left) HT-SS600 only Front speaker (Right) Surround speaker (Right) Center speaker Front speaker (Left) Subwoofer Surround speaker (Left) Getting Started continued 11GB Required cords A Speaker cords (supplied) The connector and the colour tube of the speaker cords are the same colour as the speaker terminal to be connected. Colour tube + – FRONT R – + – + FRONT L – + SURR R + – + – SURR L + – E e AE e AEe AEe AEe ASUBWOOFER CENTER Front speaker (Right) Front speaker (Left) Subwoofer Surround speaker (Right) Surround speaker (Left) Center speaker Note (HT-SS600 only) Before you connect the speakers, attach the colour labels onto the speakers so that you can identify the speakers to be connected. 12GB Tips • Since the subwoofer does not emit highly directional signals, you can place it wherever you want. • (Except for HT-SF800M) For greater flexibility in the positioning of the speakers, use the optional WS-FV11 or WS-FV10D floor stand (available only in certain countries). Attaching foot pads (Except for HT-SF800M) To prevent speaker vibration or movement, attach the supplied foot pads to the speaker as shown in the illustration below. Note Be sure to attach the supplied foot pads to the subwoofer as well. Installing the speakers on the wall You can install your front and surround speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. more than 4 mm more than 25 mm 4.6 mm 10 mm 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm. Getting Started 5 to 7 mm 3 Hang the speakers on the screws. 4.6 mm 10 mm Hole on the back of the speaker Notes • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. Hole on the back of the speaker continued 13GB To change the speaker cord If you want to change the speaker cord, you can detach the supplied speaker cord from the connector. 1 Press the connector onto a flat surface. Make sure that the catcher is facing the flat surface. catcher 2 Pull the speaker cord from the connector. 3 Twist the stripped ends of the speaker cord you want about 10 mm and insert the speaker cord into the connector. Make sure that the speaker cord is inserted according to its polarity : + to + and – to –. Otherwise the sound will be distorted and will lack bass. + – (+) (–) 4 Remove the connector from the flat surface. Note To avoid the speaker cord from coming off the speaker connector – do not use a smaller-size speaker cord. We recommend that you use the AWG#18 to AWG#24 speaker cords. – use the same speaker cord size for all th...
Dieses Handbuch ist für folgende Modelle:Heimkino-Systeme - HT-SS600 (1.09 mb)