Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Adcom
Dateigröße: 5.33 mb
Dateiname: 3454654e-07ca-44e6-ba89-16f16f40382f.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Choose from 0-128 (default = 64). • Tint - Adjusts red and green levels to accurately reproduce skin tones. Choose from 0-100 (default = 50). • ACE (Adaptive Color Enhancement) - Enhances an image by improving its contrast. Choose from High, Mid, Low, or Off (default). • Edge - Adjusts edge enhancement, ranging from soft to crisp picture detail. Choose from High, Mid, Low, or Off (default). ADVANCED CONTROLS Provides advanced tools to fine-tune the picture for each input source. Use the iA buttons to choose: • Noise Filter - Provides a variety of specialized filters to reduce picture noise (see table at right). • Deinterlace Mode - Digitally enhances the picture quality of interlaced source material (see table at right). • Film Mode - Automatically detects if source material was originally shot on film and transferred to video, e.g. DVDs, VHS tapes, and many TV programs. Choose from Auto or Off. ADVANCED CONTROLS r ^ ADVANCED CONTROLS ► NOISE FILT OFF DEINT MODE OFF FILM MODE AUTO Noise Reduction Filters • 3D A-FTD Multiple Frame Adaptive Filter with Flesh Tone Detection • 3D A Multiple Frame Adaptive Filter • 3D F-FTD Multiple Frame Fixed Filter with Flesh Tone Detection • 3D FIXED Multiple Frame Fixed Filter • 2D C-FTD Single Frame Cascade Filter with Flesh Tone Detection • 2D C Single Frame Cascade Filter • OFF No Noise Reduction Deinterlace Modes • 3D MA V1 Multiple Frame/Motion Adaptive/ Vector Interpolation • 3D MA V2 Multiple Frame/Motion Adaptive/No Vector Interpolation • 3D MA LN Multiple Frame/Motion Adaptive/ Linear • 3D Multiple Frame/No Vector Interpolation • 2D VX1 Single Frame/Vector Interpolation • 2D VX2 Single Frame/No Vector Interpolation • 2D LN Single Frame/Linear • OFF No Deinterlacing GTP-870HD Owner’s Manual 35 Chapter 3 - Setup Chapter 3 - Setup VOLUME/TONE CONFIG 40 dB OFF + 0 dB + 0 dB RETURN ► VOLUME TONE CONTROL BASS LEVEL TREBLE LEVEL Volume/Tone Configuration Want to adjust the bass, treble, and relative volume for each input source? Look no further than the Volume/Tone Configuration menu. To access the Volume/Tone Configuration menu: 1 Press the Main button on the remote control. 2 Press the Setup button. 3 Use the -*/▼ buttons to select INPUT CONFIG, then press the Select button. 4 Use the -*/▼ buttons to select VOLUME/TONE, then press the Select button. 5 Use the -*/▼ buttons to choose from the following menu items: VOLUME Sets the relative volume of the selected input. Use this feature to balance volume levels as you switch between inputs. Use the i / ► buttons to set the volume level: • The available range is -80 dB to +18 dB. • The default setting is -40 dB. TONE CONTROL Enables manual bass and treble control. Use the i / ► buttons to choose: • On or Off. • Select On to use your custom bass and treble settings for the selected input. • Select Off to use the default bass and treble settings for the selected input. BASS LEVEL Provides manual control of the bass level for the selected input. Use the i / ► buttons as follows: • The available range is -12 dB to +12 dB. • The default setting is +0 dB. TREBLE LEVEL Provides manual control of the treble level for the selected input. Use the i / ► buttons as follows: • The available range is -12 dB to +12 dB. • The default setting is +0 dB. Notes: • To make Bass/Treble adjustments 'on the fly,' first press the Bypass button on the remote control to toggle Tone Control on. Then use the Bass and Treble buttons to bring up the tone adjustment on-screen display. Finally, use the i / ► buttons to set the desired level. • Tone controls are not available in the Dolby Digital EX, DTS-ES, NEO6, and Pro Logic IIx Surround modes. 36 GTP-870HD Owner’s Manual Speaker Configuration SPEAKER CONFIG RETURN TO SETUP What speaker types and sizes are you using? The following is an overview of the Speaker Configuration menu. To access the Speaker Configuration menu: 1 Press the Main button on the remote control. 2 Press the Setup button. 3 Use the -*/▼ buttons to select SPEAKER CONFIG, then press the Select button. 4 Use the -*/▼ buttons to choose from the following menu items: FRONT Selects the relative size of your front speakers. Use the i / ► buttons to select: • Small or Large • Select Small if you DO have a subwoofer. • Select Large if you do NOT have a subwoofer. CENTER Selects the relative size of your center speaker (if applicable). Use the iA buttons to select: • Small, Large, or None • Select Small if you DO have a subwoofer. • Select Large if you do NOT have a subwoofer. • Select None if you do not have a center speaker. SURROUND Selects the relative size of your surround speakers (if applicable). Use the iA buttons to select: • Small, Large, or None • Select Small if you DO have a subwoofer. • Select Large if you do NOT have a subwoofer. • Select None if you do not have a surround speaker. SURR BACK Indicates the pr...