The signal adjusted by these knobs and [AUX SEND] master knob can be sent to an external device, such as an effect unit. AUX 1; Send ttie signal to the [AUX SEND 1] jack. AUX 2: Send the signal to the [AUX SEND 2] jack. 0: The signal is not sent to either output. (7) AUX send select switches [AUX SEL] These switches select the signal to be sent to AUX send. CH: The signal from the [INPUT] fader will be sent to AUX send. FB: The signal from [FB] will be senl lo AUX send. CD Parametri

3.2. CAUTION: Do not place anything on the hatched section as doing so will decrease heat sink efficiency. 3.3 Console mount The B-16 can be used at any free angle by using the Model 9080 as shown in Fig. 3.3 (option). 3.4 Remote control unit Model 8090 The multi-cable from the Remote Control Unit is plugged into the REMOTE CONTROL jack (25) on the B-16 rear panel. The Remote Control Unit can also be used on a mic stand by utilizing the bracket as shown in Fig. 3.4. 3.5 Line Amplifier Mod