Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Fotos und technische Daten Sony ICD-B16 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
3 To cancel the alarm setting: Press – . or >+ to flash “OFF” and press NxPLAY/STOP. To change the alarm date and time: Press NxPLAY/STOP. When the alarm date is displayed, follow the steps 3 to 5 above to change the alarm date and time. 4 Press MENU to exit the menu mode. Preventing Accidental Operation — HOLD function Slide the HOLD switch in the direction of the arrow. “HOLD” will flash three times, indicating that all the functions of the buttons are locked. To cancel the HOLD function, simply slide the HOLD switch in the opposite direction. Note When the HOLD function is activated during recording, cancel the HOLD function first to stop recording. 1 Tip Even if the HOLD function is activated, you can stop the alarm playback. To stop the alarm or playback, press STOP. Selecting the Display Mode You can select the display mode for the stop, recording and playback modes. (If the unit is left unoperated for more than 3 seconds in the stop mode, the display will show the current time, regardless of the display mode setting.) Each time you press DISPLAY, the display mode will change as shown below: Counter: Elapsed playback/recording time in one message m Remaining recording time: m Recorded date*: The date the current message was recorded. m Recorded time**: The time the current message was recorded. * If the clock has not been set, “--Y--M--D” will be displayed. **If the clock has not been set, “--:--” will be displayed. To turn off the display This unit does not have a power on/off switch. The display is shown at all times, which will not almost influence the battery life. To turn off the display, slide the HOLD switch in the direction of the arrow in the stop mode. “HOLD” will flash for three times and then the display turns off in the window. To turn on the display, slide the HOLD switch in the opposite direction. Turning off the Beep Sound BEEP ON: A beep will sound to indicate that operation has been accepted. BEEP OFF: No beep sound will be heard except for the alarm and timer. 1 Press MENU to enter the menu mode. 2 Press – . or >+ to display “BEEP ON (or OFF)” and press NxPLAY/STOP. “ON (or OFF)” will flash. 3 Press – . or >+ to select “ON” or “OFF” and press NxPLAY/STOP. The setting is completed. 4 Press MENU to exit the menu mode. Changing the Recording Mode SP: You can record with better sound (monaural sound). LP: You can record for longer time (monaural sound). 1 Press MENU to enter the menu mode. 2 Press – . or >+ to display “MODE” and press NxPLAY/ STOP. “SP (or LP)” will flash. 3 Press – . or >+ to select “SP” or “LP” and press NxPLAY/STOP. Now the setting is completed. 4 Press MENU to exit the menu mode. The selected recording mode is displayed. Index to Parts and Controls Main unit MIC jack (PLUG IN POWER) EAR (earphone) jack OPR (operation) indicator zREC (record) /STOP X PAUSE – .REVIEW/ >+CUE NxPLAY/STOP• EXECUTE HOLD VOL (volume) MIC (built-in microphone) Display window FOLDER DIVIDE DISPLAY MIC SENS (microphone sensitivity) MENU ERASE Speaker STOP Rear Battery compartment Hook for handstrap (not supplied) Playing Back All Messages in a Folder Continuously CONT ON: You can play back all messages in a folder continuously. CONT OFF: Playback stops at the end of each message. 1 Press MENU to enter the menu mode. 2 Press – . or >+ to display “CONT” and press NxPLAY/ STOP. “OFF (or ON)” will flash. 3 Press – . or >+ to select “ON” or “OFF” and press NxPLAY/STOP. Now the setting is completed. 4 Press MENU to exit the menu mode. Specifications Recording media Built-in flash memory, Monaural recording Recording time ICD-B16: SP: 5 hours LP: 8 hours 15 minutes ICD-B26: SP: 10 hours LP: 16 hours 25 minutes Frequency range 160 Hz - 3 300 Hz Speaker approx. 3.2 cm (1 5/16 in.) dia. Power output 250 mW Input/Output •Earphone jack (minijack) for 8 - 300 ohms ear receiver/headphones •Microphone jack (minijack, monaural) Plug in power Minimum input level 0.6 mV 3 kilohms or lower impedance microphone Power requirements Two LR03 (size AAA) alkaline batteries: 3 V DC Dimensions (w/h/d) (not incl. projecting parts and controls) 44.5 . 105.3 . 14.0 mm (1 13/16 . 4 1/4 . 9/16 in.) Mass (incl. batteries) 69 g (2.5 oz) Supplied accessories LR03 (size AAA) alkaline batteries (2) (For the U.S.A. only) Optional accessories Electret Condenser Microphone ECM-C10, ECM-DM5P, ECM-Z60 Audio connecting cable RK-G64HG (excluding Europe) Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information. Design and specifications are subject to change without notice. Erase Message 3 Before erasing After erasing Remaining messages are renumbered. Message 3 HOLD Display window Remaining battery indicator Repeat play indicator Recording mode indication REC (recording) indicator Selected message number/Mode indication of the menu (ON, OFF, etc.) Counter /Remaining time indication /Recording date indication /Current time indication (15:30, etc.) /Menu indication (ALARM, B...
Dieses Handbuch ist für folgende Modelle:Diktiergeräte - ICD-B26 (615.19 kb)