In the event you notice the stroller veering to one direction, loosen front axle Q/R lever, point the front wheel in the opposite direction the stroller is veering, and retighten the Q/R lever. If you need help making this adjustment, please call our Customer Service department for assistance. Note: If it is necessary to remove the front wheel, you will find it easier to open the brake Q/R lever by taking pressure off the cable. This is achieved by squeezing the brake pads with one hand while ro

If you have any questions concerning the safe use of this product, please contact us immediately. {Figure 1.a} canopy parent console handle frame parking brake rear wheel foot plate hand brake one hand fold rear suspension M3_single_Platform.indd 2 9/26/05 3:57:41 PM Parts List: Description Qty. Frame assembly with seat, canopy, and wrist strap 1 Front Wheel 1 Parent Console 1 Under-seat Basket 1 Rear Wheels 2 Front Fender 1 #8 – 11.2" Phillips head screws 4 Tools Required: Phillips screw driver

· Immediately discard any plastic wrapping. · Never allow children to fold, assemble or disassemble the stroller. · Maximum weight capacity for the Single stroller is 50 lbs. or 22.7 kg. Double 100 lbs. Or 45.4 kg. However, in the Double model the weight of 1 child should not exceed 50 lbs.or 22.7 kgs. · Never place child in stroller on their back with their head forward and feet rearward. · Avoid serious injury from falling or sliding out. Always use seat belt. · Never leave child unattended. ·

Storage and folding WARNING: Always remove child from stroller before folding Pull the back of the seats forward. It will be easier to fold if the seats are not in the recline position. Remove locking pins from side latches on the stroller frame (Double Models have 2 locking pins). Release the two latches from the frame. The stroller may automatically begin to fold, the front wheel will fold under frame and the handle will fold backwards. Storage and folding Front Fender Assembly Insert the #8 –

· Avoid serious injury from falling or sliding out. Always use seat belt. · Never leave child unattended. · Never use this stroller with roller skates or in-line skates. · Never allow stroller to be used as a toy or allow children to give rides to others. · Never use stroller if it becomes damaged. · Always be aware of traffic around you when walking or jogging. · Always engage brakes when you stop or when you let go of handle. · Always use wrist strap. · Accessories or parcels placed in or on t

Step 3. Front Wheel Assembly Turn stroller upright onto its rear wheels, then tip stroller back so the handlebar is down on the ground and the front fork is up.Attach the front wheel by loosening the exterior lock nut on each side of the front wheel far enough to allow the axle and tab washer to slide into the front fork.The tab washer’s tab should be inserted into the small hole on the outside of the front fork (Figure C).Center the wheel between the front C fork.Tighten the nuts with an adjust

Failure to follow these warnings and assemblynings and assembly · Immediately discard any plastic wrapping. · Never allow children to fold, assemble or disassemble the stroller. · Maximum weight capacity for the Single stroller is 50 lbs. or 22.7 kg. Double 100 lbs. Or 45.4 kg. However, in the DoubleMaximum weight capacity for the Single stroller is 50 lbs.Maximum weight capacity for the Single stroller is 50 lbs. model the weight of 1 child should not exceed 50 lbs.or 22.7 kgs. or 22.7 kg. Doub

Attach the front wheel by loosening the wheel’s Quick Release (Q/R) lever wheel’s Q/R lever in open position, hand tighten the cone nut until almost tight, then flip wheel’s Q/R lever backward to the closed position to lock wheel in wheel’s Q/R lever in open position, hand tighten the cone nut until almost tight,s Q/R lever in open position, hand tighten the cone nut until almost tight, place. Note this step may require minor adjustment until the Q/R lever flips back then flip wheel’s Q/R lever

The front brake operates the same as a bicycle hand brake. Squeeze leverThe front brake operates the same as a bicycle hand brake. Squeeze lever PROPER USE OF SEAT BELTS & SHOULDER STRAPS WARNING: Avoid serious injury from falling or sliding out. Always use seatbelt. Place child in seat. Make sure T-shield is between the child’s legs. When child is seated, place shoulder straps over the child’s shoulders. Pull the back of the seats forward. It will be easier to fold if the seats are not in the r

Align the holes on the bottom side of the fender with the screws and tighten with a Phillips screwdriver. Parent Console Attachment The parent console will attach to the handle by snapping it in place on the handle and above the canopy. Operating Instructions Mall Cruiser™ 11-KS188...page 2 Front Wheel Assembly - {Figure 1.c} axle release lever Rear Wheel Assembly - {Figure 1.b} quick-releaselever (open position) Parts List: Description Qty. Frame assembly with seat, 1 canopy, and wrist strap Fr