Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
or Canada. Outside these areas please call 330-963-2800 8:00 AM until 6:00 PM E.S.T. Monday through Friday. Or write us at: Century Products Company 9600 Valley View Road Macedonia, OH 44056-2096 Attention: Consumer Relations Department Please have the following information available. See label on leg of stroller. Date of Purchase: Model Number: Table of Contents Page 1 Important Information 2 Stroller Warnings c Car Seat/Stroller Assembly 3 Opening Stroller 3 Front Wheel Assembly 3 Lock Footrest 3 Rear Wheel Assembly c Car Seat/Stroller Usage 4 To Attach Car Seat Adapter 4 To Attach Car Seat 4 To Remove Car Seat Manufacture Date: c Safety First Check List 4 Read and understand instruction booklets for stroller and car seat before using. 4 Use the SmartFit™ Adjustable Base provided with this product only with Century Assura™ Premiere or SmartFit™ Infant Car Seat. 4 Never leave child unattended. 4 Use with only one (1) child at a time. 4 Do not use accessories other than those provided by Century. NOTE: All warnings and instructions apply whether stroller is being used with or without napper bar. c Weight & Height Limit • Car Seat/Stroller Use: - Less than 9 kg. (20 lbs.) -Less than 60 cm. (27 inches) • Stroller Use: - Up to 15.9 kg. (35 lbs.) -Up to 101 cm. (40 inches) c No Tools Required for Assembly Save instruction manual for future reference. c Stroller Usage 5 To Remove Car Seat Adapter 5 Canopy Positions 5 To Attach Napper Bar 5 Seat Back Positions 5 To Secure Child c Special Information 6 Folding and Storing 6 Maintenance -Cleaning - Dented Wheels 7 Replacement Parts 8 Replacement Parts Order Form ENGLISH WARNINGS Never leave child unattended. Always keep child in view, even when sleeping. • Children may become entangeled in harness straps and suffocate, even when sleeping. • Stroller may roll away, crash and seriously injure child, even with brakes engaged. Avoid serious injury from falling or sliding out. Always use seat belt. Avoid serious injury or strangulation, DO NOT place child in stroller seat when car seat adapter is attached. Remove adapter assembly BEFORE using stroller seat. DO NOT pull or carry stroller on stairs or escalators with child in it because child could fall out and be injured. DO NOT lift car seat/stroller unit by car seat handle. Handle may break. DO NOT allow child to climb unassisted into stroller as stroller may fall over injuring child. 2 DO NOT allow children to play, hang or pull down on car seat or stroller handle. • Stroller may tip over. • Car seat handle may break. Push stroller at normal walking speed only. Fast walking, jogging or running can cause loss of control and injure child. DO NOT overload basket. Maximum basket weight is 10 lbs. (4.5 kg.). Stroller may become unstable and fall over injuring child. DO NOT hang anything on handlebar or canopy as stroller could fall over and injure child. ENGLISH c Lock Footrest: 1 Push footrest down so that frame tube is centered between three (3) tabs on bottom of footrest and snaps into place. c Rear Wheel Assembly: 1 Remove axle protectors from ends of axle and discard. 2 Rotate brake lever to the unlocked position and slide wheel onto each end of axle rod with brake ribs facing in. 3 Attach wheel to axle: • Snap wheel retainer onto grooved end of axle. Make sure large end of wheel retainer is towards wheel. • Snap wheel retainer cap over wheel retainer. CAUTION: - Failure to install retainer cap may cause wheels to come off of stroller. - After wheel assembly is complete, pull on wheels to check that they are locked into place. • Line up hub cap tabs with slots in wheel and snap hub cap into place. WARNING Prevent possible choking hazard: discard axle protectors and polybag which contained rear wheel parts. 3 CAR SEAT/STROLLER ASSEMBLY c Opening Stroller: 1 Stand stroller upright and pull tab up to release latch. 2 Spread handle and rear legs until both fold locks “click” into position. c Front Wheel Assembly: 1 Hold swivel wheel assembly upright (tab pointing down). 2 Tilt stroller slightly back and push wheel assembly up onto leg until it locks in place. Repeat steps 1 & 2 for opposite leg. . CAUTION: After wheel assembly is complete, pull on wheels to check that they are locked into place. Tab Stroller Left Side Stroller Right Side Retainer Cap Wheel Hub Cap Wheel Retainer Brake Lever Tabs Brake Ribs ENGLISH 4 CAR SEAT/STROLLER USAGE c To Attach Car Seat Adapter: 1 Step down on brake lever to lock brakes. 2 Release both levers on sides of seat back. NOTE: Stroller seat back MUST be in reclined position to use car seat adapter. 3 With release handle of car seat adapter facing away from stroller, align both sides of adapter bracket with top of stroller handle grip buttons. 4 Rotate adapter bracket into handle grip opening and snap into place. Repeat for opposite side. Pull on adapter to be sure adapter is locked. c To Attach Car Seat: 1 Step down on brake lever to lock brakes. 2 With car seat facing stroller handle an...