Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Canton Dateigröße: 322.85 kb Dateiname: Unterrichtssprache:

WARNING • This product is a TOY stroller for dolls or stuffed toys ONLY. • NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur. • Maximum weight allowed = 5 pounds in EACH seat. Figure 0 Figure Page 6 Toy Caboose Stroller Instruction Manual Seatback Positioning The front seat has two positions. • To place the seat in the upright position, push the bar on the rear of the seat toward the front of the stroller and rotate the seatback towards the front of the stroller until this bar is locked in its lowest position. See Figure 12. • To recline the seat, pull the bar on the rear of the seat toward the rear of the stroller and rotate the seatback down until this bar is again in its lowest position. Securing a Rear Standing Doll • Push the bench seat to its most forward position. • Position the doll on the platform on the back of the stroller facing forward with both of their hands on the handles. See Figure 13. • Position the safety belt around the doll’s waist and under the armpit and secure it tightly. Figure Figure WARNING Children should NEVER stand on the platform. Riding is for dolls ONLY. Toy Caboose Stroller Instruction Manual Page 7 Using the Bench Seat • Push the bench seat to its most rearward position. • Position the doll on the bench seat facing backward with their feet on the platform. • Unlatch the seat belt buckle by pressing down the button in the center of the buckle and removing the male sides of the buckle. • Place the seat belt completely around the doll’s waist, place the crotch strap between the doll’s legs and snap the buckle together. See Figure 14. • Adjust the seat belt to be snug around the doll’s waist by using the adjustment strap near the buckle. Figure WARNING • This product is a TOY stroller for dolls or stuffed toys ONLY. • NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur. • Maximum weight allowed = 5 pounds in EACH seat. Storage Basket The maximum weight that can be carried in the storage basket is 5 pounds. Note: There are hook and loop attachments on the underside of the basket to stow the car seat carrier support when it is not in use. To stow the car seat carrier support, simply secure it to the basket as shown in Figure 15. Figure 5 Page 8 Toy Caboose Stroller Instruction Manual Using the stroller as a Doll Car Seat Carrier • To use the stroller to carry a doll car seat carrier, you must replace the Front Tray with the Car Seat Carrier Support. • Remove the Front Tray by pressing in on the buttons under the female fitting and pulling the tray off the brackets. • Line up the Car Seat Carrier Support to the metal tubing on the front of the stroller and push inward until the support snaps into place. See Figure 16. Pull outward on the support sides to be sure both are snapped securely in place. • Adjust the backrest to its reclined position. • If necessary, remove the infant carrier from the car seat base. • Place the infant carrier onto the top of the stroller in a REAR FACING POSITION, locating the head end of the carrier so that it rests on the car seat support and the feet end of the carrier so that it rests against the seatback. See Figure 17. • Insure that the infant carrier is pushed down into this position firmly and that it is centered side to side. • Remove the carrier restraining strap from the pouches on the sides of the front seat. Buckle it in place over the LOWEST part of the carrier sides. Adjust the strap so that it is tight around the carrier. Pull up on the carrier to be sure it is held on securely. See Figure 18. Figure 6 Figure 7 Figure 8 WARNING ALWAYS install the doll carrier in a REAR FACING POSITION. ALWAYS secure the carrier with the restraint strap. Toy Caboose Stroller Instruction Manual Page 9 Folding the Stroller • Orient the stroller with the handle bar closest to you. • Place the canopy into its closed position and push it as far forward toward the front of the stroller as it will go. • Pull upwards on the trigger mechanisms on both sides of the stroller. See Figure 19. • While these mechanisms are in the upward position, push forward and down on the stroller using the handle bar. • Secure the stroller in the folded position by engaging the locking latch located on the right side of the stroller over the extended rivet on the right side of the stroller. See Figure 20. Figure 9 Figure 0 Page 0 Toy Caboose Stroller Instruction Manual Maintenance All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be inspected periodically to insure that they are secured properly and not damaged or malfunctioning. The seat belts and safety harnesses, as well as all other straps and fabric items and their stitching should also be inspected periodically to insure that they are secured properly and not loose, torn or otherwise damaged. All moving parts, such as wheels, brakes, and hinges should also be checke...

Herunterladen

Geben Sie zwei Ziffern: