Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung InStep, modell 11-KS287

Hersteller: InStep
Dateigröße: 547.18 kb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Caution: Whenever child is in stroller always use the wrist strap. Before you remove the wrist strap from your wrist make sure you first engage the rear brakes. To Engage Rear Brakes Step on the levers next to the rear wheels until the cogs of the brakes engage the cogs of the wheel. Repeat on other side. To release brake, lift levers using your toe until cogs disengage. To Operate Front Caliper Brake: The front brake operates the same as a bicycle hand brake. Squeeze lever located on handlebar to engage front brake. Release lever to disengage. PROPER USE OF SEAT BELTS & SHOULDER STRAPS WARNING: Avoid serious injury from falling or sliding out. Always use seatbelt. Place child in seat. Make sure T-shield is between the child’s legs. When child is seated, place shoulder straps over the child’s shoulders. Slide waist straps through lower loops of shoulder straps, bring lap belt ends together and clip into place around child’s waist. Adjust waist and shoulder straps for snug fit. Operating Instructions Run Around™ & Run Around™ LTD 11-KS207, 11KS286, 11-KS287...page 3 5K_double_Platform.indd 4 9/26/05 3:50:18 PM CARE AND MAINTENANCE Check fasteners after one hour of use; check all fasteners to make sure they are secure. Adjust if necessary. Periodically check the stroller to ensure that it is in good operating condition. To adjust the stroller from pulling to the left or right (not rolling straight): Loosen the front Q/R axle and point the front wheel in the opposite direction the stroller is pulling, then tighten Q/R lever. NOTE:Sometimes it is a very slight adjustment to eliminate the pulling and this step may need to be repeated. To adjust front brake caliper: If front caliper requires additional adjustment to engage brake pads; first open Q/R brake lever, loosen the cable adjustment nut, squeeze the brake pads together and while holding brake pads retighten cable adjustment nut. Then close Q/R lever and check adjustment by squeezing hand brake lever. For micro adjustment, turn the front brake caliper’s adjusting sleeve counterclock- wise. Once the brake pads are adjusted to the desired distance from the rim, tighten the lock ring. You will need to adjust the cable periodically since it is normal for the cable to stretch from use. To clean seat and canopy: If light cleaning is required, use a soft cloth with warm water and mild soap then air dry. Do not put in washing machine. Do not put in dryer. DO NOT BLEACH. To clean frame: Wipe using a soft cloth with warm water and mild soap. Air dry. DO NOT USE polish or abrasives. WARNING: If you have any questions concerning the safe use of this product,please contact Pacific Cycle before using: 1.800.242.6110 8am-5pm CST, Monday-Friday, or MAIL to: Pacific Cycle Inc. 4730 East Radio Tower Lane Olney IL 62450 Tel: 1.800.242.6110 or visit us at E-mail: info@instep.net ONE YEAR LIMITED WARRANTY Pacific Cycle warrants this product to be free of defective materials and workmanship for 1 year from the date of original purchase. THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT, AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTY. ANY IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. This limited warranty gives you specific legal rights and you may also have other rights which may vary from state to state. This warranty is extended only to the original consumer purchaser for non-commercial use and does not cover tires or tubes, grips, brake shoes, or other wear part, ordinary wear and tear, abuse, misuse, neglect, theft, or damage due to accident. PACIFIC CYCLE, INC., IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS LIMITED WARRANTY DOES NOT COVER ANY PERSONAL INJURIES, DAMAGE TO, OR, FAILURE OF THE PRODUCT OR ANY OTHER LOSSES DUE TO ACCIDENT, ABUSE, MISUSE, ALTERATION, NEGLECT, NORMAL WEAR AND TEAR, IMPROPER ASSEMBLY, IMPROPER FIT, IMPROPER MAINTENANCE OR USE OF UNAUTHORIZED REPLACEMENT PARTS NOT DESIGNED FOR THE PRODUCT. To make claim under warranty, notification of such defect must be given to Pacific Cycle, Inc at the address stated below. You will be instructed on how the product or part needing replacement should be shipped postpaid to Pacific Cycle, Inc. Operating Instructions Run Around™ & Run Around™ LTD 11-KS207, 11-KS286, 11-KS287...page 4 Operating Instructions Run Around™ & Run Around™ LTD 11-KS207, 11-KS286, 11-KS287...page 4 5K_double_Platform.indd 5 9/26/05 3:50:19 PM ...