Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Dreamer Design Dateigröße: 964.37 kb Dateiname: Unterrichtssprache:

If you don't have something that is pictured please call our customer service line at 800.278.9626. introductionwatch fingers when folding - folding mechanism could be a pinching hazardTurn the stroller over so the foot plate is down. Lift the stroller by the handle until it clicks. assemblysun canopyAll Weather CoverBike Pump(not pictured) foot plateheight adjustable handlefront quickrelease wheelfork tipsthumb tabsharnesspocketssuspensionRebound GST™ model onlybasketcanopy windowwater bottleholdershand brakefoot brakerear wheelpush button foam protectorpush buttonMake sure the foot brake is in the unlocked, up, position. To put the rear wheels on, push the button on the wheel while pushing the wheel axle into the stroller frame. Remove and discard the foam protectors on the wheel axles. be sure to discard the plastic bags from the wheels - they are a suffocation hazard for childrencheck to make sure the wheels are secure before each useassemblyTip the stroller back so it is resting on its handle and rear wheels to put the front wheel on. Remove the fork tip protectors. Make sure the brake release lever is pointed out, away from the stroller. lever pointed out Starting at the bottom of the brake pads, push the wheel up and in between the brake pads. The quick release lever should be straight out. While holding the lever, tighten the thumb nut until it is barely snug. The axle should not move side to side. Rotate the tire upwards and find the flat sides on the round axle and slide all the way to the back of the forks, on BOTH assemblyPush the quick release lever down so it is flush with the frame. Give the wheel a tug to make sure it is secure. Be sure to close the brake calipers by pushing the lever forward all the way. flat sidebrake padsthumb nutquick release levercheck to make sure the wheel is secure before each uselever forwardcheck to make sure the brake caliperis locked before each use Make sure the seat strap is snapped around the frame on both sides, by the basket. To lock the hand brake, pull the lever in and hold it while you push the button down. As you hold the button down, release the brake lever. Your stroller comes with two parking brakes: a foot brake and a hand brake. The hand brake, located on the handle, locks the front wheel. The foot brake is located near the basket, on the rear axle. It locks the rear wheels. assemblybrakesTo release the hand brake pull the lever in until the button pops up. NEVER trust your brakes 100%! Always keep an eye on your stroller. Always use your safety wrist strap any time a child is in the stroller. check to make sure the brake caliperis locked before each usePull the foot brake up with your foot to release it. To lock the foot brake you simply push it down with your foot. Then try to push the stroller to make sure the brake is secure. seat strapIf the front wheel still moves, see the brake adjustment section on page 24You should always use both brakes when the stroller is not being pushed. leverpush buttonreleasing brakebrake locked Your canopy has multiple adjustments. It also has a side ventilation system, with flaps that roll up and velcro into place. To bring the canopy to it's next position, flip the mesh portion under. Use the canopy at it's fully extended position during midday sun to provide your child with the most amount of shade. bubble sun canopy™ When the canopy is not needed, pull it all the way back. To view your child through the top window, simply roll back the sun cover and velcro into place. To clean the canopy window use a damp cloth. T...

Herunterladen

Geben Sie zwei Ziffern: