(2.4m) • Adjustable Wrench • Wrenches: (One) 3/4” (Two) 1/2” • Phillips Screwdriver WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. · See instruction manual for proper installation and maintenance. · Use caution when performing dunk type activities on this unit. · Do not hang from any part of unit, including backboard, support braces, rim or net. · Check un

Attach a side panel (22) to the end panel (23) by using leg bolt (4) and leg washer (5). B. Slide the plastic rod washer (21) and rod bushing (20) onto each end of the player rods. C. Follow the diagram and insert the player rods (14, 15, 16, 17, 18, & 19) through the designated holes in the side panel (22). IMPORTANT: Make sure the small hole in the end of the rods (17, 18, and 19) are through the side panel 0 0 0 6 0 0 0 0 „ °°U X v* % D. Slide the other ends of the player rods t

Mark pole sections with tape (not supplied) at indicated distances from ends as shown. Tape (Not Supplied) 18" (42.7 cm) 6" (15.2 cm) 24" (61 cm) PLAYING SURFACE GROUND SURFACE 2. Ensure ground is level with playing surface, then dig pole hole. CONTACT UTILITIES BEFORE DIGGING. WARNING! IMPORTANT!: Maximum distance from edge of hole to edge of playing surface 6” (15.2 cm). 9 10/04 P/N 21168202 4. 1" (2.54 cm) SIDE VIEW Fill hole approximately 1/3 full with mixed concrete. FIG. A FLANGE Insert gr

SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. This unit is intended for display purposes only and should not be used for play. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts in this document. Proper and complete assembly, use an

Part No. Description 19 7 203798 Bolt, Hex 5/16-18 x 1.5" 20 4 204290 Net 21 1 206219 Pole Cap, 3" 22 3 207103 Pole Cap, 3.5" 23 2 900033 Bracket, S/J 24 1 900060 Pole, 3" 25 4 Rim 26 1 900253 Bracket, Pole Mount, No Tools 27 7 206987 Wedge 28 1 909256 Board, 48", Fan, Viper 29 1 909259 Board, 44", Fan, Evolution, NT 30 1 909602 Board, 44", Fan, Zone Attack 31 3 912006 Extension Arm 32 1 939235 Board, 48", SFA, Titanium II 33 3 990062 Pole, 3.5" 34 1 204516 Pole Sleeve HARDWARE IDENTIFIER (BOLTS

BASKETBALL CENTER BASKETBALL CENTER IMPORTANT! To ensure prompt and correct handling of any problems, or to answer any questions, please contact the Sample and Display Technician at 1-800-558-5234. REQUIRED TOOLS AND MATERIALS: • Wrenches: (Two each) 7/16”, 1/2”, 9/16”, and 3/4” or Pliers • 3/16” Allen Wrench • Step Ladder, 8 ft. (2.4 m) Model 89780 SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY. This unit is i

WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 206118 5/97 See instruction manual for proper installation and maintenance. Use caution when performing dunk type activities on this unit. Do not hang from any part of unit, including backboard, support braces, rim or net. Check unit before each use f

72 1 203017 Hex Nut, 3/8 73 2 203160 Weld Stud, 5/16-18 x 1.5 Long 74 1 920038 Inner Bracket - Black 75 1 220064 Spacer, metal, .5 O.D. x .402 I.D. x 4.96 Long 76 1 203439 Bolt, Hex, 3/8 x 6 Long 77 1 200484 Spring 78 1 220043 Concave Washer 79 1 220569 Label, Logo 80 1 960043 Cover Plate - Orange 81 2 220140 Screw, Self Tap, 1/4-20 x .5 Long 82 1 204281 Net 83 1 200119 Front Cover 84 4 265601 Bolt, Carriage, 5/16-14 x 3-1/2 Long 85 1 211249 Label, Height and Moving 86 1 202438 Rope, Nylon Doubl

READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. WARNING! Tools Supplied: 1 Allen Wrench 1 Phillips Screwdriver 1 Wrench 7/16 1 Wrench5/16 Tools Needed: 4 "D" Cell Batteries Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-333 061 Internet Address: 1 11/03 P/N 211483E © COPYRIGHT 2000 b

WARNING! IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER: U.S. 1-800-558-5234; CANADA: 1-800-284-8339; ID# M6809011 12/06 4 Get to know the basic parts of your basketball system... TOP POLE MIDDLE POLE BOTTOM POLE STRUTS ELEVATOR ASSEMBLY BACKBOARD BASE WHEEL CARRIAGE ASSEMBLY F