Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Armitron Dateigröße: 367.87 kb Dateiname: ArmitronAnalogSubdials.pdf Unterrichtssprache:

Observe how the Moon moves across the dial. About every turn should produce a single, distinct movement of the Moon in a clockwise position. Each movement represents one day (24 hours). During a normal 24 hour period, (while the watch is working) the Moon will move in a clockwise direction. See Chart below to accurately set the correct Phase of the Moon. Push Crown in when desired Moon Phase is obtained. WATER RESISTANCE This Watch is Water Resistant to the depth specified on the back of the watch. DO NOT SUBMERGE IN WATER DEEPER THAN THAT SPECIFIED ON THE CASE BACK OF THE WATCH. If there are no markings, either on the front dial or case back of the watch to indicate water resistance, do not submerge the watch in water. WATCH INSTRUCTIONS 6P29 20/1883BLK, 20/1891BLK, 20/1905GMG, 20/1952, 20/1953, 20/4141BLK, 20/4169BKBK, 20/4017GRY, 20/4117BLK, 20/4121BLU, 20/4123BLU, 20/4127BLK, 20/4147BLU, 20/4163WHT FEATURES • HOURS, MINUTES, SECONDS • DAY OF THE WEEK, DATE AND 24 HOUR MILITARY TIME SUB DIALS • WATER RESISTANT AS INDICATED ON THE WATCH SETTING THE FEATURES 1. To advance the Hour and Minutes, pull the crown out to position “2” when the second hand reaches the 12 o’clock position so that the second hand stops there. Then set the hour and minute hands to the desired time. When setting the minute hand, put it 5 minutes later than the time to be set, and then turn it back to the correct time. Note that the 24 hour military sub dial time zone also changes at the time of setting. Make sure that the 24 hour military time zone corresponds to the correct AM/PM TIME. Push in crown when desired time is obtained. 2. To advance the day, pull the crown out to position “2” and turn clockwise. Each full 24 hour turn will advance the day zone by one full day. Make sure that you then set the correct time with the corresponding 24 hour military time. Push in crown when desired day and correct time is obtained. 3. To Advance the date, pull the crown out to position “1”. Rotate crown counter clockwise to advance the date. Push in the crown when desired date is obtained. Do not set the date between 9PM and Midnight as it will not change correctly. WATER RESISTANCE This Watch is Water Resistant to the depth specified on the back of the watch. DO NOT SUBMERGE IN WATER DEEPER THAN THAT SPECIFIED ON THE CASE BACK OF THE WATCH. If there are no markings, either on the front dial or case back of the watch to indicate water resistance, do not submerge the watch in water. Armittrron® CHANGING THE BATTERY Change the battery when the watch becomes slow or does not operate. It is not necessary to return your watch to Armitron for battery replacement. However, it is recommended that you bring your watch to a local jeweler. Some important facts to remember when changing the battery are: (1) before removing the battery, be sure to denote polarity so that the new battery is installed exactly the same way and (2) replace with same or equivalent. NOTE: BATTERIES ARE NOT COVERED UNDER...

Herunterladen

Geben Sie zwei Ziffern: