Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Accusplit Dateigröße: 1.25 mb Dateiname: Unterrichtssprache:

After recalling the first record, press [RECALL] once more to exit from Recall mode and go back [RECALL] to chronograph mode.The “RECALL” icon will turn OFF. 28 29 30-31 30 31 DATA Mode Press [MODE] until you enter DATA mode. The mode message “DATA” will be shown for one to two seconds before the number of free memories is to be shown. You can press [START • SPLIT] to scroll through all segments.The current segment will come first. [RECALL] During memory recall, you can press either [START • SPLIT] or [STOP • RESET] to exit from chrono recall mode and jump to the chrono start/stop or lap state respectively. FREE 95 LAP Recall indicator turns off when watch returns to regular Chronograph mode. Segment indicatorshows watch is in DATA modeSegment indicator shows watch is in DATA mode Date/Time Stamp for this split 32-33 32 33 The header consisting of the date/time stamp will be shown. The number of laps in the segment will appear in the upper left while the segment num- ber is displayed in the middle left. If the segment shown is not your desired segment, press [START • SPLIT] to reach the desired segment. The current segment will be accessed first, then it will cycle back to the 1st, then 2nd and so on. When you have found the segment you want, you can press [RECALL] button consecutively to read the lap records from the first to the last lap. As you continue to press [RECALL] during the dis- play of the last lap, you can advance to the next segment by pressing [START • SPLIT]. The front page of the segment will be shown. Say the next segment is SEG 1. How to delete individual memory segments: Search the desired segment first as described above. During the display of the segment front page, press and hold [STOP • RESET] for 2 sec- Number of laps inthis segment Segment number 34-35 onds to activate Delete One function. “DELETE How to delete all memory segments: ONE” will be shown in blinking and beep sound Instead of deleting one segment, you can also will be generated. delete all memory segments. When you enter the dELETE Data mode, you see the screen “FREE XXX LAP”. OnE Press and hold the [STOP • RESET] for 3 seconds. You will hear “Beep, beep, beep” for 3 seconds, A “ready” period of 2 seconds will be counted. At then a long “Beep”. At this point all data in the the end of the ready period, all the lap records of memory will be deleted and “DELETE ALL“ will the corresponding segment will be erased, and a show on the display. long beep sound will be heard. Then the display If you don’t want to delete the records, you can will show the next segment. If you don’t want press any key to exit “DELETE ALL“ state before to delete the records, you can press any key to the end of the ready period to return to the seg exit from delete ready state before the end of the ment front page display. ready period. The watch will go back to displaying the segment front page. dELETE ALL 34 35 36-37 Note: You cannot delete all segments while the stopwatch is running. If nothing happens when you push and hold [STOP • RESET] check to make sure the stopwatch is stopped. Timer Mode Press [MODE] until you enter the Timer mode. 3 count-down operation modes are available on this stopwatch: • Count down repeat (CR) • Count down stop (CS) • Count down, then count up (CU) The timer is set at the factory to the count-down repeat (CR) mode. At entering timer mode, the mode message “TIMER” will be shown for a second before timer count mode is displayed. 36 37 38-39 3 second “beep…beep” sound will be generated Number of cycles Timer setting for a timer setting within one minute; 15 second Time in Countdown Elapsed time “beep…beep” sound for 1 minute to 10 minutes Repeat mode setting and 30 second “beep…beep” sound for Time of day over 10 minutes. Pressing any key will stop the beep sound. The upper line shows the programmable timer Under CR operating mode, the timer value will value (initially set at 0:00:00:0) while the middle be reloaded and count down will start again. The line displays the current timer counting. Time of timer cycle counter will be increased by one and Day clock display is at the lower line of the dis- updated on the display. play. “CR” indicates the current timer operating mode while the timer cycle counter is located at Under CS operating mode, the timer, after count- the upper left of the display. ing down to 0:00’00”, will stay at 0:00’00”0 until you press [STOP • RESET] to reload the timer value. Before starting the timer, enter a countdown time first. Then press [START • SPLIT] to start timer Under CU operating mode, the timer, after running. When the timer counts down to zero, a counting down to 0:00’00”0, will count up and stop at 19:59’59”9. 38 39 40-41 40 41 How to set the timer Press and hold [RECALL] (S1) for 2 seconds to activate timer setting. Timer setting starts with second digits, which are shown blinking. You can press [START • SPLIT] (S3) to advance the flashing digits. Or you can press [STOP • RESET] (S...

Herunterladen

Geben Sie zwei Ziffern: