Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 375.79 kb Dateiname: Unterrichtssprache:

Scale can occur in different colours. Although scale is harmless, too much scale can influence the performance of your kettle. Descale your kettle regularly by following the instructions given in chapter ‘Descaling’. -This appliance is intended to be used in household and similar applications such as: 1 staff kitchen areas in shops, offices and other working environments; 2 farm houses; 3 by clients in hotels, motels and other residential type environments; 4 bed and breakfast type environments. -In order to avoid a hazard due to inadver tent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. Boil-dry protection This kettle is equipped with boil-dr y protection.This device automatically switches off the kettle if it is accidentally switched on when there is no water or not enough water in it.The on/off switch stays in ‘on’ position and the power-on light, if available, stays on. Set the on/off switch to ‘off ’ and let the kettle cool down for 10 minutes.Then lift the kettle from its base to reset the boil-dr y protection.The kettle is now ready for use again. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. 1 Before first use Remove stickers, if any, from the base or the kettle. 2 Place the base on a dry, stable and flat surface. 3 To adjust the length of the cord, wind it round the reel in the base. Pass the cord through one of the slots in the base (Fig. 2) 4 Rinse the kettle with water. 5 Fill the kettle with water up to the MAX level and let the water boil once (see chapter ‘Using the appliance’). 6 Pour out the hot water and rinse the kettle once more. Using the appliance 1 Fill the kettle with water, either through the spout or through the open lid (Fig. 3). 2 If the lid is open, close it. Make sure that the lid is properly closed to prevent the kettle from boiling dr y. 3 Place the kettle on its base and put the plug in the wall socket. 4 Set the on/off switch to ‘I’ to switch on the kettle (Fig. 4). Note:You can switch off the kettle at any time by setting the on/off switch to ‘O’. The kettle starts to heat up. , The kettle switches off automatically when the water reaches boiling , point. Cleaning and descaling Unplug the appliance before you clean it. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Never immerse the kettle or its base in water. Cleaning the kettle 1 Clean the outside of the kettle with a soft, damp cloth moistened with warm water and some mild cleaning agent. Cleaning the filter Scale is not harmful to your health but it may give your drink a powder y taste.The scale filter prevents scale par ticles from ending up in your drink. Clean the scale filter regularly. 1 You can clean the filter in three ways: 1 leave the filter in the kettle when you descale the whole appliance (see section ‘Descaling the kettle’ in this chapter). 2 remove the filter from the kettle and gently clean it with a soft nylon brush under the tap (Fig. 5). 3 remove the filter from the kettle and clean it in the dishwasher. -To remove the filter, push the filter backwards (1) and then lift it out of the kettle (2). (Fig. 6) 2 Put the filter back into the kettle after cleaning it under the tap or in the dishwasher. Slide the filter behind the brackets (1) and then push it forwards until it snaps home (2) (Fig. 7). Descaling the kettle Regular descaling prolongs the life of the kettle. In case of normal use (up to 5 times a day), the following descaling frequency is recommended: -Once ever y 3 months for soft water areas (up to 18dH). -Once ever y month for hard water areas (over 18dH). 1 2 3 4 5 6 , Fill the kettle with water up to three-quarters of the MAX level and bring the water to the boil. After the kettle has switched off, add white vinegar (8% acetic acid) to the MAX level. Leave the solution in the kettle overnight. Empty the kettle and rinse the inside thoroughly. Fill the kettle with clean water and boil the water. Empty the kettle and rinse it with clean water again. Repeat the procedure if there is still some scale in the kettle. You can also use an appropriate descaler. In that case, follow the instructions on the package of the descaler. Ordering accessories To purchase accessories for this appliance, please visit our online shop at If the online shop is not available in your countr y, go to your Philips dealer or a Philips ser vice centre. If you have any difficulties obtaining accessories for your appliance, please contact the Philips Consumer Care Centre in your countr y.You find its contact details in the worldwide guarante...

Herunterladen

Geben Sie zwei Ziffern: