Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Sony Dateigröße: 205.86 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  CDP-CE345

When you reduce the output level, “FADE” appears in the display. When you turn off the player, the output level automatically returns to the maximum level. Note If you press the ANALOG OUT LEVEL +/– buttons on the remote while recording, the recording level will change even when it is preset on the tape deck, etc. • If you have a digital component such as a digital amplifier, D/A converter, DAT or MD Connect the component via the DIGITAL OUT (OPTICAL) connector using the optical cable (not supplied). Take off the cap and plug in the optical cable. Note that you cannot use fading in or out (page 15) and Time Fade (page 15) functions when making this connection. POC-15 Optical cable (not supplied) CD player Digital component DIGITAL OUT OPTICAL DIGITAL INPUT OPTICAL Note When you connect via the DIGITAL OUT (OPTICAL) connector, noise may occur when you play CD software other than music, such as a CD-ROM. Setting the voltage selector (voltage selector equipped models only) Check that the voltage selector on the rear panel of the player is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver before connecting the AC power cord to a wall outlet. 220 - 240 V 110 - 120 V Connecting the AC power cord Connect the AC power cord to a wall outlet. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position. 1 Remove all the discs from the disc tray. 2 Press A OPEN/CLOSE to close the disc tray. “no dISC” appears in the display. 3 Wait for 10 seconds, then press POWER to turn off the player. Basic Operations Basic Operations Playing a CD 25 634 CONTINUE AMS PUSH ENTER SHUFFLE PROGRAM DISC 1 POWER DISC 2 DISC 3 DISC 4 DISC 5 REPEAT TIME EXCHANGE DISC SKIP MUSIC SCAN FADER CHECK CLEAR SEARCHTIME FADE PEAKEDIT/ OPEN/CLOSE • See pages 4 - 5 for the hookup information. 1 1 Turn on the amplifier and select the CD player position so that you can listen to the sound from this player. 2 2 Press POWER to turn on the player. 3 3 Press A OPEN/CLOSE, and place a disc on the disc tray. With the label side up Disc number 4 4 To place other discs, press DISC SKIP and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first. 5 5 Press CONTINUE to select ALL DISCS or 1 DISC Continuous Play mode. Each time you press the CONTINUE button, “ALL DISCS” or “1 DISC” appears in the display. When you select The player plays ALL DISCS All discs in the player consecutively in the order of disc number 1 DISC Only the disc you’ve selected 6 Basic Operations Basic Operations z You can select the disc you want to start playing first Press one of the DISC 1 - 5 buttons. z You can adjust the output level to the amplifier (CDPCE345 only) Z Press ANALOG OUT LEVEL +/– on the remote. You can reduce the output level up to –20 dB. When you reduce the output level, “FADE” appears in the display. When you turn off the player, the output level automatically returns to the maximum level. Note If you press the ANALOG OUT LEVEL +/– buttons on the remote while recording, the recording level will change even when it is preset on the tape deck, etc. 6 6 Press H. The disc tray closes and the player plays all the tracks once (Continuous Play). Adjust the volume on the amplifier. l AMS LPOWER CONTINUE AMS PUSH ENTER SHUFFLE PROGRAM DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 REPEAT TIME EXCHANGE DISC SKIP MUSIC SCAN FADER CHECK CLEAR SEARCHTIME FADE PEAKEDIT/ OPEN/CLOSE To stop playback Press x. DISC 1 - 5 To Pause Resume play after pause Go to the next track Go back to the preceding track Go to the next disc Select a disc directly Stop play and remove the CD H XxA OPEN/CLOSE DISC SKIP You need to Press X Press X or H Turn l AMS L clockwise Turn l AMS L counterclockwise Press DISC SKIP Press DISC 1 - 5 Press A OPEN/CLOSE Basic Operations 7 Playing CDs Playing CDs Display information while playing a disc Using the Display While playing a disc, the display shows the current disc number, track number, playing time of the track You can check information about the disc using the and the music calendar. display. Current disc number Playing time TIME Music calendarCurrent track number 12 3 4 5 67 8 9 10 1 2 3 4 5DISCSALL TRACKDISC MIN SEC 1 1 156 Checking the total number and playing time of the tracks Press TIME before you start playing. The display shows the current disc number, the total number of tracks, total playing time and music calendar. Current disc number Total playing time Total number of tracks Music calendar 12 3 4 5 67 8 9 10 1 2 3 4 5DISCSALL TRACKDISC MIN SEC 110 4528 The information also appears when you press the A OPEN/CLOSE button to close the disc tray. The tracks numbered over 20 cannot be displayed in the music calendar. Notes on the disc number indications • The red circle arou...

Herunterladen

Geben Sie zwei Ziffern: