Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
With this camera, you should always select images by viewing them on the monitor screen. Do not specify images by file name without viewing the file contents. date 111 FILE MANAGEMENT To configure print settings for a single image 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “DPOF”, and then press []. 3. Use [] and [] to select “Select images”, and then press []. 4. Use [] and [] to display the image you want. 5. Use [] and [] to specify the number of copies. • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed. 6. To turn on date stamping for the prints, press [DISP] so 1212 1 is displayed. • To turn off date stamping for the prints, press [DISP] so 1212 1 is not displayed. • Repeat steps 4 through 6 if you want to configure other images for printing. 7. After all the settings are the way you want, press [SET] to apply them. 112 FILE MANAGEMENT To configure print settings for all images 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “DPOF”, and then press []. 3. Use [] and [] to select “All images”, and then press []. 4. Use [] and [] to specify the number of copies. • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed. 5. To turn on date stamping for the prints, press [DISP] so 1212 1 is displayed. • To turn off date stamping for the prints, press [DISP] so 1212 1 is not displayed. 6. After all the settings are the way you want, press [SET] to apply them. 113 FILE MANAGEMENT PRINT Image Matching II Images include PRINT Image Matching II data (mode setting and other camera setup information). A printer that supports PRINT Image Matching II reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them. * Seiko Epson Corporation holds the copyright for PRINT Image Matching and PRINT Image Matching II. Exif Print Exif Print is an internationally supported, open standard file format that makes it possible to capture and display vibrant digital images with accurate colors. With Exif 2.2, files include a wide range of shooting condition information that can be interpreted by an Exif Print printer to produce better- looking prints. IMPORTANT! • Information about the availability of Exif Print compatible printer models can be obtained from each printer manufacturer. 114 FILE MANAGEMENT 115 1. Use the DPOF procedure on page 111 to specify the images in file memory that you want to print. 2. Use the USB cable that comes with the camera to connect the USB cradle to a printer. • Also, connect the AC adaptor to the USB cradle and plug the AC adaptor into an electrical outlet. 3. Set the camera on the USB cradle. 4. Turn on the printer. 5. Load paper for printing the images into the printer. Using USB DIRECT-PRINT Your camera supports USB DIRECT-PRINT, which was developed by Seiko Epson Corporation. When connected directly to a printer that supports USB DIRECT-PRINT, you can select images to be printed and start the print operation directly from the camera. DPOF settings (page 111) are used to determine which images and how many copies should be printed. USB DISP MENU SET REC PLAY PHOTO CHARGE USB FILE MANAGEMENT 6. Press the USB cradle [USB] button. • This displays the print menu on the camera’s monitor screen. 7. On the camera’s monitor screen, use [] and [] to select “Print”, and then press [SET]. • This automatically starts printing of the images you specified with the DPOF procedure. • If you want to print the same batch of images again, press the [USB] button on the USB cradle. • A message appears on the monitor screen, followed by the DPOF setting screen (page 112), if there are no DPOF settings currently configured on the camera to control the printing operation. If this happens, configure the required DPOF settings and then perform step 6 of the above procedure again. • If you want to change the current DPOF settings, select “DPOF” on the print menu to display the DPOF setting screen (page 112). 8. After printing is complete, turn off the camera and remove it from the USB cradle. IMPORTANT! • See the documentation that comes with your printer for information about print quality and paper settings. • Contact your printer manufacturer for information about models that support USB DIRECT-PRINT, upgrades, etc. • Never disconnect the USB cable, or perform any camera or USB cradle operation while printing is in progress. Doing so causes a printer error. • To interrupt an ongoing print operation, perform the required operation on the printer. • The camera’s monitor screen will go blank after printing starts. A blank monitor screen does not necessarily mean that printing is complete. Check the status of your printer to find out if printing is complete. 116 FILE MANAGEMENT Using the FAVORITE Folder You can copy scenery shots, photos of your family, or other special images from a file storage folder...