Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Normal speed playback will resume when the buttons are released. • To Pause momentarily during playback press the PLAY/PAUSE button again. The sound stops and the PLAY Indicator flashes, however the disc continues to spin. To cancel Pause and resume normal playback press the PLAY/PAUSE button once more. Normal playback resumes and the PLAY Indicator stops flashing. 5.) Adjust the VOLUME control as desired. 8 PD6920_C010703.p65 8 7/1/2003, 17:22 6.) To Stop playback at any time press the CD STOP button. The disc stops and the display again shows the total number of tracks on the disc. After the last track has played the disc stops automatically and the display again shows the total number of tracks on the disc. 7.) Open the CD door, remove your disc, and close the CD door again. 8.) Move the FUNCTION selector to the OFF position to shut the power ‘Off’. TO START PLAYBACK FROM A SPECIFIC TRACK Insert your disc in the player, close the door, and wait until the display shows the total tracks. Press either the or button until the desired track number appears in the display, then press the PLAY/PAUSE button to begin playback on that track. REPEAT PLAYBACK You can program the player to repeat either a single track or all tracks on the disc continuously. The Repeat feature can be activated while the disc is playing or while the disc is stopped. One Track Repeat Press the REPEAT button once. The REPEAT Indicator appears. Select the track you wish to repeat with the or buttons and then press the PLAY/PAUSE button. The selected track will be repeated continuously. To cancel One Track Repeat press the STOP button once. ALL Tracks Repeat Press the REPEAT button twice. The REPEAT ALL Indicator appears. Press the PLAY/PAUSE button to begin playback. The entire disc will be repeated continuously. To cancel All Tracks Repeat press the STOP button once. 9 PD6920_C010703.p65 9 7/1/2003, 17:22 PROGRAMMED PLAYBACK You can program up to 19 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program. Note: The player cannot be programmed while a disc is playing. If a disc is playing press the STOP button to stop playback before you begin the programming steps below. 1.) Move the FUNCTION selector to CD, insert your disc in the player, close the door, and wait until the total track number appears in the display. 2.) Press the CD PROGRAM button once. The PROGRAM Indicator and program memory “00” begin flashing in the display. 3.) Use the / buttons to select the first track to be programmed. (Example: Track 08). 4.) When track number “08”flashes in the display, press the PROGRAM button once again to enter the track “08”in program memory number “01”. Track number “08”disappears and “00”flashes again in the display, indicating that you may now select a track to be entered in program memory number “02”. 5.) Use the or buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM button again to enter that track in the program memory. 6.) Repeat Step 5 until you have entered up to 19 tracks in the program memory. When the memory is full, the “––”flashes in the LCD display 7.) To begin programmed playback press the PLAY/ PAUSE button. The LCD display will show the first programmed track and playback will begin on that track. The PROGRAM Indicator flashes. 10 PD6920_C010703.p65 10 7/1/2003, 17:22 After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the PROGRAM button and then the PLAY/PAUSE button. To cancel the programmed sequence from memory, press the STOP button at programming mode, open the CD door, or move the FUNCTION selector to the OFF position. Program Repeat Playback You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 7 in previous page. When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature. The REPEAT ALL Indicator appears in LCD display and all the tracks in your programmed sequence will be repeated continuously. To cancel Programmed Repeat Playback press the STOP button until both the PROGRAM and REPEAT Indicators go ‘Off’. STEREO HEADPHONE JACK Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the Phones jack (located at front panel) for private listening without disturbing others. Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase the VOLUME control to a comfortable listening level. The built in speakers are automatically disconnected when headphones are connected to the headphone jack. 11 PD6920_C010703.p65 11 7/1/2003, 17:22 CARE AND MAINTENANCE CARE AND MAINTENANCE COMPACT DISC CARE • To remove a disc from its storage case, pr...
Dieses Handbuch ist für folgende Modelle:CD-Player - SB260 (591.6 kb)