Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Please retain this manual for future reference. TABLE OF CONTENTS • Location and Controls-------------------------------------------------------- 3 • Connecting to Power----------------------------------------------------------- 4 • Power Supply---------------------------------------------------------------------- 4 • Connections ------------------------------------------------------------------- 4 • Tuner Operation------------------------------------------------------------------ 5 • Cassette Operation ----------------------------------------------------------- 5 • To Record on a Cassette -------------------------------------------------- 6 • Sound adjustments --------------------------------------------------------- 7 • Compact Disc Operation ---------------------------------------------------- 8 • Track Skip ------------------------------------------------------------------- 9-10 • Manual Search ---------------------------------------------------------------- 10 • Repeat ------------------------------------------------------------------------ 11 • Disc programming ----------------------------------------------------11-12 • Turntable ------------------------------------------------------------------------- 12 • Remote control -------------------------------------------------------------- 13 • Important ------------------------------------------------------------------------------ 14 • Specifications ------------------------------------------------------------------------ 16 RCD904 1 2 3 - 8 9 1011 12 13 14 15 16 17 18 19 20 21 22 24 23 30 29 2728 26 25 32 38 39 33 - 37 31 3 4 3 4 LOCATION OF CONTROLS 1. Mains Lead , Speaker Sockets and FM Antenna wire ( at the rear of the unit ) 2. CD Tray 3. RECORD Key 4. PLAY Key 5. REWIND Key 6. FAST FORWARD Key 7. STOP / EJECT Key 8. PAUSE Key 9. CASSETTE Compartment A 10. DISC SKIP Button 11. CD REPEAT Button 12. PROGRAM Button 13. PHONES Socket 14. .. FUNCTION Selector (Phono/Tuner/Tape/CD) 15. .. CD STOP Button 16. .. STANDBY/ON Button 17. .. PRESET EQUALIZER Button 18. .. FM-STEREO Indicator 19. .. STANDBY/Mute Indicator 20. EQ Indicators 21. LCD Display 22. REMOTE Sensor 23. Turntable (PHONO) 24. VOLUME Up/Down Button 25. DIAL Pointer 26. HIGH SPEED DUBBING/ FM Stereo Selector 27. CD PLAY/PAUSE Button 28. RADIO Band wave selector 29. TUNING Knob 30. CD Skip/Search Forward Button CD Skip/Search Backward Button 31. INTRO Button 32. CASSETTE Compartment B 33. PLAY Key 34. REWIND Key 35. FAST FORWARD Key 36. STOP / EJECT Key 37. PAUSE Key 38. CD OPEN / CLOSE Button 39. CD DIRECT Access - 1, 2, 3 CONNECTING TO POWER Before switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. For your own safety read the following instructions carefully before attempting to connect this unit to the mains. MAINS (AC) OPERATION This unit is designed to operate on AC 120V 60Hz current only. Connecting it to other power sources may damage the unit. CAUTION To prevent electric shock disconnect from the mains before removing cover. No user serviceable parts inside. Refer servicing to qualified service personnel. POWER SUPPLY Remove the stereo carefully from the box, retaining the packaging for future use. AC POWER OPERATION Connect the plug to a mains power inlet 120V AC ~ 60 Hz. CONNECTIONS SPEAKER CONNECTION Connect each speaker to the corresponding speaker terminals on the back of the system. Ensure that the left speaker is connected to the left connector, and the right speaker to the right connector. HEADPHONE This unit will accept stereo headphones (not included) with a 3.5mm plug and an impedance of 8 ohms or greater. The speakers are automatically disconnected when headphones are connected to the PHONES JACKS (13). AM/FM TUNER OPERATION • Press the STANDBY/ON Button (16) to ON . The Standby indicator (19) will go off. • Set the Function Selector (14) to the TUNER position. • Select the desired frequency band with the Band Selector (28). • Tune to the desired radio station by turning the Tuning control (29). • Press the STANDBY/ON Button to OFF. ANTENNA • For FM reception there is a built-in FM antenna wire at the rear of the unit. Move the wire around to obtain the best reception. • For AM reception the signals are picked up through a built-in ferrite antenna. Your may have to orient the unit to obtain the best reception. FM & FM-STEREO RECEPTION • Stereo reception is possible when the tuned FM station is broadcasting in stereo. • When the FM Stereo button (26) is “up” and the station is broadcasting in Stereo, the STEREO indicator (18) lights up. • When FM stations are weak and are disturbed, listening can be improved by pressing down the FM STEREO selector (26). Reception will then be in MONO. CASSETTE OPERATION INSERTION AND REMOVAL OF CASSETTES • Press the STANDBY/ON Button (16) to ON . The Standby indicator will go off. • Set the Function Selector (14) to the TAPE position. • Press the Stop / Eject Key (36) to open ...