Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Miele Dateigröße: 727.16 kb Dateiname: Unterrichtssprache:

The drum periodically rotates for about 1 hour. Using the dryer 4. Select the dryness level The dryness level can be selected in the "Normal" and "Wrinkle-free" programs. (The dryness level of the other programs cannot be adjusted.) ^Press the selection button until the desired indicator illuminates. In the "Wrinkle-free" program, only "More Dry", "Normal" and "Less Dry" can be selected. 5. Select the buzzer (if desired) ^ Press the "Buzzer" button to have a tone beep at the end of the program. Indicator light: on = buzzer selected off = buzzer not selected To adjust the buzzer volume: – turn the dryer on – close the door – select a program – if the indicator is lit, press the "Buzzer" button so the indicator light goes out. ^ Press and hold the "Buzzer" button until its indicator is lit and you hear the desired volume and tone. Using the dryer 6. Start the program ^ Press the "Start/Stop" button. Once the program starts, the current cycle of the program will be indicated in the "STATUS" display. 7. At the end of a program The "End/Anti-crease" indicator will light at the end of a program and the buzzer will sound if it was selected. If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details. ^ ^ ^ ^ ^ ^ ^ Press the "Door" button. Open the door. Remove the laundry. Check that the drum is empty. Clean the lint filter after each use (see "Dryer care"). Close the door. Press the "On/Off" button to turn off the dryer. Using the dryer Canceling or changing a program ^ Press and release the "Start/Stop" button to stop the drying program. To continue drying: ^ Select the new program by pressing the e or -button. ^ Select any desired options. ^ Select a dryness level (available in the "Normal" and "Wrinkle-free" programs). ^ Press and release the "Start/Stop" button to start the new program. Adding or removing laundry during a program ^ Turn off the dryer using the "On/Off" button. ^ Press the "Door" button. ^ Open the door. ,CAUTION - Do not touch the rear of the drum while adding or removing items! There is a danger of burns due to high temperatures in the drum. ^ Add or remove items. ^ Close the door. ^ Turn the dryer back on with the "On/Off" button. Child lock Child lock When activated, the child lock prevents the dryer from being operated by locking the control panel functions. The dryer can be turned on but not started. The "Child lock" indicator will flash. The door can be opened. To activate the child lock 1. Make sure the dryer is turned off and the door is closed. 2. Press and hold the "Anti-crease" and "DRYNESS" buttons at the same time, hold until step 5. 3. Turn on the dryer with the "On/Off" button. 4. Press the "OPTIONS" button 3 times. 5. Release the "Anti-crease" and "DRYNESS" buttons. The "Child lock" indicator will flash and the dryer is now locked. 6. Turn off the dryer using the "On/Off" button. To deactivate the child lock Repeat steps 1. to 5. The "Child lock" indicator will go out. The control panel is now unlocked. 6. Turn off the dryer using the "On/Off" button. Dryer care Cleaning the lint filters ^ Wipe the lint off the filter with your hand (do not use sharp objects). ^ Any lint remaining in the hollow part of the door can be removed through the gap at the bottom with a dust brush or vacuum. ^ Clean the gasket, 2, with a damp cloth. ^ Return the lint filter and close the door. ,A clogged filter is a fire hazard! The lint filter must be cleaned after every program. ^ Open the door and remove the lint filter, 1, by gently lifting it upwards. The lint filter can be rinsed with hot water if necessary. The filter must be dried thoroughly before being returned to the dryer door. Dryer care Cleaning the grille filters ^ Clean the grille filters in the door opening regularly. While the filters are removed also clean the opening beneath the filters with a dust brush or vacuum. ^ Take the grille filters out by turning the knob at the top of the filter, a, until it clicks and pull them out, b. ^ The grille filters can be rinsed with hot water if necessary. The filters must be dried thoroughly before being returned to the door opening. ^ Any lint remaining in the hollow part beneath the grille filters can be removed with a dust brush or vacuum. ^ Return the grille filters and make sure the knob clicks into place when locking it by turning it clockwise. 15 Dryer care Cleaning the exterior and the Cleaning the drum control panel ^ The stainless steel surfaces of the drum can be cleaned using a ,To reduce the risk of electric non-abrasive stainless steel cleaner. shock, disconnect the dryer from the power supply by shutting off the ^ Wipe clean with a soft cloth. power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer. They will damage the surface. ^ The exterior and the control panel can be cleaned with warm water and liqui...

Herunterladen

Geben Sie zwei Ziffern: