Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. • We suggest that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. • If you do dispose of the carton and packing materials, please do so properly. Emerson cares about our environment. POWER SOURCE This system is designed to operate on 120V 60Hz AC house current . Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty.You will note that this system is equipped with a polarizedAC power plug having one blade wider than the other. This is a safety feature. AC Plug AC Outlet If this plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an out-dated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician. AC OPERATION 1. Unwind the AC Power Cord completely. 2. Insert the plug into any convenient 120V 60Hz AC outlet. 4 ES28_ib_0321.p65 4 21/3/2002, 11:10 5 LOCATION OF CONTROLS AND INDICATORS 1. POWER On/Off Button. 2. CD Compartment. 3. CDDoorOpen /Close Button. 4. REPEAT /MEMORYUPButton. 5. PROG. / MEMORY Button. 6. Preset EQ Button. 7. BAND Button. 8. TUNER Button. 9. CD Button. 10. Multi Function Display. 11. Remote Control SENSOR. 12. MUTE Indicator. 13. Reverse Skip Search / TUNING DOWN Button. 14. Forward Skip Search / TUNING UP Button. 15. Play/Pause Button. 16. STOP Button. 17. VOLUME UP / DOWN Buttons. 18. FM Wire Antenna. 19. AM External Loop ANT Jack. 20. Speaker Jacks. 21. PHONES Jack. 22. AC Power Cord. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 BACK PANEL TOP PANEL FRONT PANEL ES28_ib_0321.p65 5 21/3/2002, 11:10 REMOTE CONTROL 1.) VOLUME UP / DOWN Buttons. 2.) POWER On/Off Button. 3.) CD STOP Button. 6 5 4.) CD PLAY / PAUSE Button. 7 4 5.) CD Button. 3 9 6.) TUNER Button. 2 11 7.) Tuning UP / DOWN / 1 CD Skip Search / Buttons. 8.) MEMORY / PROG.(PROGRAM) Button. 9.) M-UP / REPEAT Button. 10.) BAND Button. 11.) MUTE Button. 8 10 BATTERY INSTALLATION Insert 2 pcs ‘AAA’ size (Alkaline) batteries (not included) into the battery compartment of the remote controller. Be sure to observe the polarity markings which are engraved inside the battery compartment, then close the cover. BATTERY REPLACEMENT When the batteries become too weak, the operating distance of the remote controller is greatly reduced and you will need to replace the batteries. NOTES: • To maintain the accuracy and long life of the transmitter, do not press two or more buttons simultaneously. • If the remote control is not to be used for a long time, remove the batteries to prevent possible damage through leaking batteries. • Do not mix different types of batteries, or old batteries with new ones. USING THE REMOTE CONTROLLER CORRECTLY • Point the remote controller at the Remote Sensor. • The functions of the buttons on the remote control are the same as the corresponding controls on the main unit. • When there is a strong ambient light source, the performance of the infrared Remote Sensor may be degraded, causing unreliable operation. • The maximum effective distance for remote control operation is about 15 feet. 6 ES28_ib_0321.p65 6 21/3/2002, 11:10 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS SPEAKER CONNECTION Connect each speaker to the corresponding speaker terminals on the back panel of the main unit. Make sure that the left speaker plug is connected to the left (L) speaker jack and the right speaker plug is connected to the right (R) speaker jack. Right Speaker Left Speaker PRESET EQUALIZER (EQ) • This unit is equipped with a preset equalizer which has been added to enhance your listening pleasure by altering the frequency response of the music. • Press the Preset EQ button on main unit repeatedly to cycle through the following equalization modes. 7 ES28_ib_0321.p65 7 21/3/2002, 11:10 LISTENING TO RADIO OPERATION 1.) Press the POWER button to turn the unit ‘On’. 2.) Select the Tuner function by pressing the TUNER button. 3.) Select the desired band (AM or FM) with the BAND button. 4.) Tune to the desired radio station by pressing the TUNING UP or DOWN buttons on the unit or on the remote control. 5.) If you hold the TUNING UP or DOWN button for more than half a second the Tuner will begin to automatically scan until a strong signal is found. 6.) To turn off the radio, press the POWER button to switch the unit into standby mode. STORING PRESET STATIONS 1.) Tune either automatically or manually (as described in steps 4 or 5 above) to the station to be stored. 2.) Press the PROG / MEMORY button once. “MEMORY”will flash in the display for 5 seconds. During this time you must select the desired memor...