Login:
Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Anleitung Samsung, modell SC-148E

Hersteller: Samsung
Dateigröße: 150.39 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


I re-booted my PC and it paused After installing the device driver, your system during the start-up program. start-up program may take more time than expected. If it does not start-up after 60 seconds, verify your AUTOEXEC. BAT file and, if necessary, contact your local computer dealer. The disc tray does not open. The drive may not be installed correctly. Verify the physical installation. In the File Manager, the CD-ROM icon does not display. I installed the software and rebooted my PC. The CD-ROM drive icon/directory still does not appear. If you have installed the Then ... CD-ROM drive ... And the software Re-boot your PC. And have not installed Install the software the software following the instructions on page 5. . When the program of Windows 95/98 is broken up, re-stall it as the computer can not read the program anymore. . Verify the connections between the drive and your PC. Check that the 40-pin flat cable is connected to an IDE interface (some PCs are equipped with an SCSI disk interface). . Verify your AUTOEXEC. BAT file. Go to page 5 for the verification procedure. . Check the LASTDRIVE = command in the CONFIG. SYS file. The specified letter must take the CD-ROM volume into account. If you do not know which letter is assigned to the CD-ROM, enter Z. . Using the documentation provided with your PC, check that the IDE hard disk is set up in MASTER mode. SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice. SECTIONS SC-140 SC-148 DISC Disc types supported CD-DA, CD-ROM Mode-1, CD-ROM XA Mode-2 Form-1, Form-2, CD-Plus, CD-Extra, Photo-CD(Single, Multi-session), Video CD ready, Enhanced CD, CD-I/FMV, CD-R Disc diameter 12cm or 8cm DRIVE PER FORMANCE Data transfer rate Max. 6000KB/s Max. 7200KB/s PIO Mode - 4. DMA MW2 Access time (1/3 stroke) 80ms(typical) 70ms(typical) Data buffer capacity 128KB Laser Semiconductor Laser Slide mechanism Gear motor Spindle motor Brushless motor Loading type Tray Loading, DC motor(Soft Eject) ERROR RATE Mode-1 : 1block / 10 bits, Mode-2 : 1 block/10 bits12 9 FRONT PANEL Button Open/Close Indicator(LED) Busy Headphone output Stereo Mini - jack (. 3,6 mm) 0.60 ± 20% (Vrms) 33. Volume control Dial type REAR PANEL Required power +5V DC 1.7A, +12V DC 1.0A Interface connector ATAPI Audio output Line out 0.70 ± 20%(Vrms), 47k. Jumper block Device configuration jumper OPERATING ENVIRONMENT Work area Temperature : 5~45 .C, Humidity : 8~80% Storage area Temperature : -40~60 .C, Humidity : 5~90% GENERAL Dimensions 149(W) x 42.5(H) x 200(D)mm (Including bezel) Net weight 950g RELIABILITY MTBF 125,000 POH(Duty 20%) Disc compartment loading 30,000 times 6 7 ...

Dieses Handbuch ist für folgende Modelle:
CD, DVD, Blu-ray-Laufwerke - SC-140B (150.39 kb)
CD, DVD, Blu-ray-Laufwerke - SC-140F (150.39 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien