Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
The anti-splash cover has an integral filling funnel with a cap. The cap may be removed to add ingredients, as shown in figure 8b, but the cover and cap should be in place whenever the power unit is in operation. The anti-splash cover and cap serve to prevent the escape of flour dust at the beginning of the stirring process, as well as prevent splatter, and also serves to prevent accidental contact with the moving whisks. Placing into Operation w/Twin Beating Whisks Make sure that the switch is in the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into the wall outlet. The bowl with whisk assembly is now ready for operation. See table 1 for examples demonstrating the use of the twin beating whisks. Mixing bowl tips: 1. When using the mixing bowl to knead or mix a recipe designed to be prepared by hand, you will find that with the Bosch Kitchen Machine you can usually place all the ingredients in the mixing bowl at once. When doing this, always place the liquids in first. This will assure more thorough mixing. 2. When adding ingredients to a mixture: a. Turn the rotary switch to a lower speed b. Remove the cap from the filling funnel c. Add the ingredients through the funnel opening and replace the cap 3. If a large batch of dough is to be left in the mixing bowl and allowed to rise, the cover should be removed and placed only loosely on the bowl so that it is free to move if the dough should begin to press on it. Removing Contents Before beginning to remove the contents from the mixing bowl, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the anti-splash cover by turning the cover clockwise and lifting off. Once the cover has been removed, the dough hook or the twin beating whisks may be removed by turning the hook or whisk assembly clockwise while lifting. The mixing bowl can be removed from the power unit by turning the bowl clockwise while lifting. The contents may now be used as desired. 14 Care and Cleaning of Bowl and Its Accessories The mixing bowl, twin beating whisks, dough hook anti-splash cover, filling funnel cap and bowl, either the stainless steel bowl or plastic bowl, are dishwasher safe. To facilitate cleaning: > The driveshaft should be removed from the mixing bowl, see figure 4 > The beating whisk assembly should be disassembled, see figure 7 The power unit of the kitchen machine should be cleaned using a clean, damp cloth only. Never use coarse or caustic cleaning products to clean this appliance. Never immerse the power unit in water. Figure 9. 9a. Cover closure/funnel 9b. Blender jar 9c. Cover 9d. Blade assembly Stainless Steel Blender (MUZ 7 MX3) WARNING 1. There is a risk of injury from sharp blades when using the blender attachment. 2. Keep hands and utensils out of the blender jar while it is attached to the power unit. 3. Blades are sharp. Handle carefully. 4. To avoid injury, never place blade assembly on power unit without blender jar properly attached. 5. Always operate the blender with the cover in place. Always hold the cover in place when in operation to prevent the cover from coming off. 6. The use of attachments, including canning jars, not recommended by the manufacturer, may cause a risk of personal injury. 7. When blending hot and/or frothing liquids, process a maximum of 18 fluid ounces (0.5 litres) at a time. The Bosch Concept 7400 Kitchen Machine includes the MUZ 7 MX3 blender . The blender accessory consists of, see figure 9. How to Use Blender The blender has been designed for crushing ice; mixing liquids; pureeing vegetables; preparing special diet and infant foods; pulverizing fruit, vegetables, nuts and dried bread (for bread crumbs); and preparing mayonnaise and sauces. Before beginning to use this or any other attachment, make sure that the power unit is on a clean, smooth, suitable work surface and switched to the Off position, “O/Off,” and that you have removed the motor drive cover. 1. Before using the blender for the first time, it is recommended that the blender jar cover, closure/funnel and blade assembly be washed. All components, except the blade assembly, are dishwasher safe. Remove the blade assembly from the blender, see figure 10. CAUTION Blade/base assembly is very sharp. Handle with care. 15 The blade assembly may be easily removed, by inverting the blender, pressing down on the quick release handle, turning it counterclockwise until it stops, as shown in figure 10a, and then lifting up, see figure 10b. Figure 10. Wash the blade assembly under running water. Do not place the blade assembly in the dishwasher or allow it to stand in water. This will tend to wash out the lubricant. After cleaning, rinse thoroughly and dry before using. - Figure 11. 2. To assemble or reassemble blade assembly into the blender, insert the blade assembly into the blender jar as shown in figure 11, press down on the quick release handle of the blade assembly and turn clockwise to the stop. The blade a...