Login:
Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Anleitung Craftsman, modell 315.3413

Hersteller: Craftsman
Dateigröße: 5.58 mb
Dateiname: 07134130e.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. n Do not dispose of batteries in a fire. The cell may explode. Batteries should be recycled, consult your local waste authority for information regarding available recycling and/or disposal options. n When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery pack terminals together may cause sparks, burns, or a fire. MODEL BATTERY PACK (Li-ion) CHARGER 315.341300 315.113740 (130285003) 315.113710 (130156001) (Multi-Chemistry) 315.259260 (140351001) BATTERY PACK (Ni-Cd) 315. 259260 (140351001) 1425301 (911041) 315.115730 (140301003) 130279003, 130279005 (Item No. 911375) SAVE THESE INSTRUCTIONS glossary of terms Bar Tip Guard An attachment that may be provided on the end of the guide bar to prevent the chain at the end of the guide bar from contacting the wood. Bucking The process of cross cutting a felled tree or log into lengths. Chain Brake A device used to stop the chain saw. Chain Saw Powerhead A chain saw without the saw chain and guide bar. Clutch A mechanism for connecting and disconnecting a driven member to and from a rotating source of power. Drive Sprocket or Sprocket The toothed part that drives the saw chain. Felling The process of cutting down a tree. Felling Back Cut The final cut in a tree felling operation made on the opposite side of the tree from the notching undercut. Front Handle The support handle located at or toward the front of the chain saw. Front Handle Guard A structural barrier between the front handle of a chain saw and the guide bar, typically located close to the hand position on the front handle and sometimes employed as an activating lever for a chain brake. Guide Bar A solid railed structure that supports and guides the saw chain. Kickback The backward or upward motion, or both of the guide bar occurring when the saw chain near the nose of the top area of the guide bar contacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Kickback, Pinch The rapid pushback of the saw which can occur when the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar. Kickback, Rotational The rapid upward and backward motion of the saw which can occur when the moving saw chain near the upper portion of the tip of the guide bar contacts an object, such as a log or branch. Low-Kickback Chain A chain that complies with the kickback performance requirements of ANSI B175.1-1991 when tested on a representative sample of chain saws. Normal Cutting Position Those positions assumed in performing the bucking and felling cuts. Notching Undercut A notch cut in a tree that directs the tree’s fall. Oiler Control A system for oiling the guide bar and saw chain. Rear Handle The support handle located at or toward the rear of the saw. Reduced Kickback Guide Bar A guide bar which has been demonstrated to reduce kickback significantly. Replacement Saw Chain A chain that complies with the kickback performance requirements of ANSI B175.1-1991 when tested with specific chain saws. It may not meet the ANSI performance requirements when used with other saws. Saw Chain A loop of chain having cutting teeth, that cut the wood, and that is driven by the motor and is supported by the guide bar. Spiked Bumper (Spike) The pointed tooth or teeth for use when felling or bucking to pivot the saw and maintain position while sawing. Switch A device that when operated will complete or interrupt an electrical power circuit to the motor of the chain saw. Switch Linkage The mechanism that transmits motion from a trigger to the switch. Switch Lockout A movable stop that prevents the unintentional operation of the switch until manually actuated. SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read The Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product. Wet Conditions Alert ...

Dieses Handbuch ist für folgende Modelle:
Kettensägen - 315.3413 (5.58 mb)
Kettensägen - 315.3413 (5.58 mb)
Kettensägen - 315.3413 (5.58 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien