Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
STORAGE If storing saw for more than 30 days, follow steps below. 1. Drain oil tank. 2. Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture. 3. Dry guide bar and chain. 4. Place chain in container filled with oil. This will prevent rust. 5. Wipe a thin coating of oil over surface of guide bar. 6. Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture. 7. Store chain saw • in a high or locked place, out of children’s reach • in a dry place • in a carrying case or with scabbard over guide bar TECHNICAL SERVICE You may have further questions about assembling, operating, or maintaining this saw. If so, contact DESA International’s Technical Service Department at 1-800-858-8501. You can also visit DESA International’s technical service web site at SERVICE PUBLICATIONS You can receive an illustrated parts list free of charge. Send a self-addressed stamped envelope to address on back page of this manual. When writing, include model number and serial number of saw. You will find these numbers on saw motor housing decal. REPLACEMENT PARTS AND ACCESSORIES DESA International P.O. Box 90004 Bowling Green, KY 42102-9004 1-800-858-8501 Parts Department WARNING: Use only replacement parts and accessories described in this manual. Use of other parts or accessories could damage saw or injure operator. For a list of Authorized Service Centers or Parts Distributors near you, call 1-800-858-8501 or visit our website at You may purchase the following service or replacement parts: LNT-2 Part Number Description 104302-01S# Guide bar, 8" (20.3 cm) 104301S# Chain, 8" (20.3 cm) 097567-01S Guide bar, 10" (25.4 cm) 091371S Chain, 10" (25.4 cm) 097568-02S Guide bar, 12" (30.5 cm) 091373-02S Chain, 12" (30.5 cm) 075752 Drive Sprocket 099178H, 100089-06, 100089-07 & EL-1 Part Number Description 097570-01S Guide bar, 14" (35.5 cm) 091374-02S Chain, 14" (35.5 cm) 075752 Drive Sprocket # Must order both pieces Continued 108539 21 REPLACEMENT PARTS AND ACCESSORIES Continued EL-7, 098031J, 099039J, 100089-04, 100089-05 Part Number Description 097572-03S Guide bar, 16" (40.6 cm) 091375-02S Chain, 16" (40.6 cm) 075752 Drive Sprocket POLE SAW, 104316-04 (8"/20.3 cm) POLE SAW ASSEMBLY, 104317 Part Number Description 104302-01S Guide bar, 8" (20.3 cm) 104301S Chain, 8" (20.3 cm) 075752 Drive Sprocket POLE SAW, 106890-01 (10"/25.4 cm) POLE SAW ASSEMBLY, 106821 Part Number Description 097567-01S Guide bar, 10" (25.4 cm) 091371S Chain, 10" (25.4 cm) 075752 Drive Sprocket GENERAL Part Number Description 079963-02 Plastic scabbard, 8"(20.3 cm) & 10" (25.4 cm) 079963-04 Plastic scabbard, 12" (30.5 cm), 14" (35.5 cm), & 16" (40.6 cm) 106809-01 Hand Guard 077155 Adjusting Plate Assy. REPAIR SERVICE Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty. Each ...
Dieses Handbuch ist für folgende Modelle:Kettensägen - 075762J (1.12 mb)
Kettensägen - 098031J (1.12 mb)
Kettensägen - 099039J (1.12 mb)
Kettensägen - 099178H (1.12 mb)