Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Adcom Dateigröße: 773.02 kb Dateiname: Unterrichtssprache:

When the source is turned on, it supplies 12 volts to the IGN, which turns the amplifier on. If two or more components are being turned on by the remote lead, it is suggested to "relay" the turn on. (see Fig. 1) Here, the relay (Bosch 0-322-204-150 or P&B VF4-45F11) is triggered by the remote lead which sends current to the IGN connections. This is considered a good installation technique and a SPDT relay is readily available from most installation shops. From source unit’s “Power Antenna" or “Remote” lead To “IGN” or “Turn-On” terminal of all Amplifiers, GFIs and processors To constant +12 Volts (B+ or power " distribution block) Fig. 1 SPEAKER CONNECTIONS: ADCOM uses gold-plated speaker connectors that will accommodate up to 8AWG speaker wire. Standard speaker wire gauge is 12AWG to 16AWG and will fit easily into the terminals. Be sure there are no frayed or loose wire strands that may end up touching other wires. Speaker polarity is clearly marked; special attention must be taken while connecting speakers. Speaker polarity is essential to proper amplifier operation! Any number of speakers may be used with your ADCOM Car Audio amplifier. The “system impedance” is dependent on the wiring configuration and selection of speakers. Although ADCOM amplifiers are stable into loads of less than Vz Q, continuous operation into impedances lower than 2 i2 may eventually lead to thermal overload, causing the amplifier to shut down until it cools off. Your authorized ADCOM Car Audio dealer is best able to maximize the performance of your system by calculating impedance and ensuring the proper connection of all system components. MoSt™ CONFIGURATION: ADCOM Car Audio amplifiers are capable of running stereo and mono configurations simultaneously. In order to achieve this, one channel must be inverted at the input. Inverting simply means making the positive lead negative, and the negative lead positive. For consistency, we recommend that the “B" or "RIGHT” channel be inverted. In addition, the same channel’s output must be inverted to complete the process. Inverting techniques will be discussed in sections 2 and 3. INPUT SENSITIVITY SETTING: Located on the end panel, along with the input connectors, are two small openings that house the input sensitivity controls. THEY ARE NOT AMPLIFIER VOLUME CONTROLS! When properly set, they match the output of the source unit with the input of the amplifier. If you wish to have the amplifier Chassis Ground and source unit properly matched, consult your authorized ADCOM Car Audio dealer. Optimal performance and the advantages of “passively terminated balanced” inputs are realized when sensitivity controls are turned fully clockwise. Since the sensitivity controls affect only the positive inputs, the controls MUST be fully clockwise in the MoSt™ or mono configurations. CARE AND CLEANING; Great care has been taken by ADCOM to assure that your amplifier is as flawless in appearance as it is electrically. In the event that your ADCOM amplifier needs cleaning, use a damp cloth or dry, soft bristled paint brush. Do not use cleaning fluids of any kind as damage to the finish may result. Treat this product as a precision instrument, and it will provide you with many years of musical enjoyment. If you experience any problems with your ADCOM Car Audio amplifier, please contact your local authorized dealer or call ADCOM Customer Service at (908) 390-1130 between 9am and 5pm EST. Ask for Technical Assistance for car audio. SECTION 2: RCA Input Amps INPUT SECTION: It may s...

Herunterladen

Geben Sie zwei Ziffern: