Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: AT&T Dateigröße: 79.37 kb Dateiname: dd936cd0-6bd5-4c93-a7b2-fd1083f1d56d.pdf Unterrichtssprache:

Changes or corrections to the information contained in this document may be incorporated into future issues. TO ORDER COPIES OF THIS DOCUMENT Call: AT&T Customer Information Center on 800-432-6600, In Canada: 800-255-1242 or Write: AT&T Customer Information Center 2855 North Franklin Road P.O. Box 19901 Indianapolis, Indiana 46219 Order: Document No. 555-200-738 Issue 1, August 1991 For more information about AT&T documents, see Business Communications Systems Publications Catalog (555-000-010). HEARING AID COMPATIBILITY This telephone is compatible with the inductively coupled hearing aids prescribed by the Federal Communications Commission (FCC). Prepared by ©1991 AT&T AT&T Technical Publications Department All Rights Reserved Middletown, New Jersey 07748 Printed in USA 2 Your 7313H, 7314H, 7315H, 7316H and 7317H Voice Terminals The 7313H BIS-10, 7314H BIS-22, 7315H BIS-22D, 7316H BIS-34 and 7317H BIS-34D voice terminals are designed so that you can conveniently use the many features of the AT&T DEFINITY® Communications System Generic 1. For System 25/Merlin® customers who are migrating to the DEFINITY® Communications System Generic 1, please note: Features and terminal functionality may no longer be provided or may not be provided in the identical state. Equivalent feature and terminal capabilities will be available for the most important features. The following Figures - 1, 2 and 3 depict the 7313H, 7314H and 7317H voice terminals. Figure 1. 7313H Voice Terminal 1 The 7314H and 7316H are similar, except for the number of feature buttons. Figure 2. 7314H Voice Terminal The 7315H and 7317H are similar, except for the number of feature buttons. Figure 3. 7317H Voice Terminal 2 The feature buttons, LEDs and controls on the voice terminals pictured in Figures 1, 2 and 3 are described below. For your convenience, they are listed alphabetically. Call appearances/ Feature buttons Conference button Contrast dial Dial pad Drop/Stop button Feature buttons Handset HFAI button HFAI light HFAI/Mic button HFAI/Mic light Usually, 3 of these 10 buttons are devoted to handling incoming and outgoing calls (call appearances) and are labeled with an extension number. The remainder of these buttons access features (feature buttons) and are labeled with a feature name. Each call appearance/feature button has a red in-use light and a green status light. For setting up conference calls. Available on some of the display voice terminals, to alter the contrast on the Liquid Crystal Display (LCD). The standard 12-button pad for dialing phone numbers and accessing features. A fixed feature button for dropping the last party added to a conference call or for disconnecting from a regular call. The Stop subfeature is not supported by AT&T DEFINITY® Communications System Generic 1. (Stop can be programmed into an abbreviated dial string by pressing "7" rather than pressing the Stop button.) Each of these buttons accesses features and is labeled with a feature name. (The 7314H and 7315H have 12 feature buttons; the 7416H and the 7317H have 24 feature buttons.) For placing and answering calls (also known as the receiver). In most cases, you must lift the handset (go off-hook) before you can use a feature. Hands Free Answer on Intercom is not supported by AT&T DEFINITY® Communications System Generic 1. See Internal Automatic Answer (int-aut-an), the new automatic answering capability for internal calls, which will provide equivalent functionality. Not supported by AT&T DEFINITY® Communications System Generic 1. A fixed feature button on the 7313H. Hands-Free Answer on Intercom is not supported by AT&T DEFINITY® Communications System Generic 1. (See Internal Automatic Answer, the new automatic answering capability for internal calls, which will provide equivalent functionality.) The HFAI/Mic button operates as a local ON/OFF control for the terminal’s microphone. (The microphone goes on automatically when an internal automatic answer call is answered.) A green light on the 7313H that blinks when the microphone is activated. 3 Hold/Pause button Liquid Crystal Display (LCD) Message button Message light Microphone/Mic button Microphone light Mode switch Recall button Ringer volume control Set button Speakerphone button Speakerphone light For putting a call on hold. The Pause subfeature is not supported by AT&T DEFINITY® Communications System Generic 1. (Pause can be programmed into an abbreviated dial string by pressing "8" rather than pressing the Pause button.) Available only on the 7315H and 7317H voice terminals, a 1-line, 16 character alphanumeric display, with the ability to scroll to a second line, used as a clock, calendar, alarm, and timer in Local mode, and used to display number dialed, account code, and calling party ID in Normal mode. A fixed feature button, not supported by AT&T DEFINITY® Communications System Generic 1. A green light which goes on steadily when a message has been...

Herunterladen

Geben Sie zwei Ziffern: